AT25DF021A-XMHNHR-T belongs to the category of Serial Flash Memory.
It is primarily used for storing and retrieving digital data in electronic devices.
The AT25DF021A-XMHNHR-T is available in a small outline, 8-lead SOIC package.
The essence of AT25DF021A-XMHNHR-T lies in its ability to provide reliable and efficient storage solutions for electronic devices.
This product is typically packaged in reels, with 2500 units per reel.
AT25DF021A-XMHNHR-T utilizes the Serial Peripheral Interface (SPI) to communicate with the host device. It stores data in non-volatile memory cells, which retain information even when power is removed. The device can be accessed through various commands sent via the SPI interface, allowing for read, write, erase, and protection operations.
The AT25DF021A-XMHNHR-T is commonly used in the following applications:
These alternative models provide increased storage capacity for applications requiring larger memory sizes.
Word count: 540 words
Sure! Here are 10 common questions and answers related to the application of AT25DF021A-XMHNHR-T in technical solutions:
Q: What is the AT25DF021A-XMHNHR-T? A: The AT25DF021A-XMHNHR-T is a serial flash memory device manufactured by Adesto Technologies.
Q: What is the storage capacity of the AT25DF021A-XMHNHR-T? A: The AT25DF021A-XMHNHR-T has a storage capacity of 2 megabits (256 kilobytes).
Q: What is the interface used to communicate with the AT25DF021A-XMHNHR-T? A: The AT25DF021A-XMHNHR-T uses the Serial Peripheral Interface (SPI) for communication.
Q: What voltage levels does the AT25DF021A-XMHNHR-T support? A: The AT25DF021A-XMHNHR-T supports both 1.8V and 3.3V voltage levels.
Q: Can the AT25DF021A-XMHNHR-T be used in industrial applications? A: Yes, the AT25DF021A-XMHNHR-T is designed to operate reliably in industrial environments.
Q: Does the AT25DF021A-XMHNHR-T have built-in security features? A: Yes, the AT25DF021A-XMHNHR-T provides hardware and software protection mechanisms for data security.
Q: What is the maximum operating frequency of the AT25DF021A-XMHNHR-T? A: The AT25DF021A-XMHNHR-T can operate at frequencies up to 104 MHz.
Q: Can the AT25DF021A-XMHNHR-T be used for firmware storage in embedded systems? A: Yes, the AT25DF021A-XMHNHR-T is commonly used for storing firmware in various embedded systems.
Q: Is the AT25DF021A-XMHNHR-T compatible with other SPI flash memory devices? A: Yes, the AT25DF021A-XMHNHR-T follows industry-standard protocols and can be used alongside other SPI flash devices.
Q: What is the temperature range within which the AT25DF021A-XMHNHR-T can operate? A: The AT25DF021A-XMHNHR-T has an extended operating temperature range of -40°C to +85°C.
Please note that these answers are general and may vary depending on specific application requirements and datasheet specifications.