ACS723LLCTR-05AB-T
Introduction
The ACS723LLCTR-05AB-T is a current sensor belonging to the category of integrated circuits. This device is commonly used for measuring DC and AC currents in various electronic applications. The ACS723LLCTR-05AB-T possesses unique characteristics, comes in a specific package, and offers distinct advantages and disadvantages.
Basic Information Overview
- Category: Integrated Circuit
- Use: Measuring DC and AC currents
- Characteristics: High accuracy, low noise, small form factor
- Package: Surface Mount Device (SMD)
- Essence: Accurate current sensing
- Packaging/Quantity: Tape & Reel, 2500 units per reel
Specifications
- Operating Voltage: 3.0V to 5.5V
- Output Voltage: 2.5V ± 62.5mV/A
- Bandwidth: 80kHz
- Operating Temperature: -40°C to 85°C
- Isolation Voltage: 2100Vrms
Detailed Pin Configuration
- VCC
- GND
- VIOUT
- NC
- NC
- NC
- NC
- NC
Functional Features
- High accuracy current sensing
- Low-noise output
- Small footprint
- Overcurrent detection
Advantages and Disadvantages
Advantages
- High accuracy
- Low noise
- Small form factor
- Wide operating voltage range
Disadvantages
- Limited isolation voltage
- Not suitable for high-power applications
Working Principles
The ACS723LLCTR-05AB-T utilizes the Hall effect to measure current. When a current flows through the conductor, it generates a magnetic field which is sensed by the Hall-effect sensor. This information is then converted into an output voltage proportional to the current being measured.
Detailed Application Field Plans
The ACS723LLCTR-05AB-T is widely used in various applications including: - Power supplies - Motor control - Battery management systems - Inverters - Industrial automation
Detailed and Complete Alternative Models
Some alternative models to the ACS723LLCTR-05AB-T include: - ACS712 - ACS758 - INA219 - LEM LA 55-P
In conclusion, the ACS723LLCTR-05AB-T is a versatile current sensor with high accuracy and low noise, making it suitable for a wide range of electronic applications.
[Word Count: 326]
10个与ACS723LLCTR-05AB-T在技术解决方案中的应用相关的常见问题及解答
Sure, here are 10 common questions and answers related to the application of ACS723LLCTR-05AB-T:
What is ACS723LLCTR-05AB-T?
- ACS723LLCTR-05AB-T is a fully integrated, hall-effect-based linear current sensor IC with a low resistance current conductor.
What is the operating voltage range for ACS723LLCTR-05AB-T?
- The operating voltage range for ACS723LLCTR-05AB-T is 3V to 5.5V.
What is the typical output sensitivity of ACS723LLCTR-05AB-T?
- The typical output sensitivity of ACS723LLCTR-05AB-T is 40mV/A.
What is the maximum continuous current that ACS723LLCTR-05AB-T can measure?
- ACS723LLCTR-05AB-T can measure a maximum continuous current of ±5A.
What is the output voltage range of ACS723LLCTR-05AB-T?
- The output voltage range of ACS723LLCTR-05AB-T is typically from 0.6V to 2.8V when measuring the full range of current.
What is the accuracy of ACS723LLCTR-05AB-T?
- The accuracy of ACS723LLCTR-05AB-T is typically within ±1.5%.
Can ACS723LLCTR-05AB-T be used for bidirectional current sensing?
- Yes, ACS723LLCTR-05AB-T can be used for bidirectional current sensing.
What are the typical applications of ACS723LLCTR-05AB-T?
- Typical applications of ACS723LLCTR-05AB-T include motor control, load detection and management, power supplies, and overcurrent fault protection.
Does ACS723LLCTR-05AB-T require an external power supply?
- Yes, ACS723LLCTR-05AB-T requires an external power supply within the specified operating voltage range.
Is ACS723LLCTR-05AB-T suitable for automotive applications?
- Yes, ACS723LLCTR-05AB-T is suitable for automotive applications due to its high accuracy and reliability.
I hope these questions and answers are helpful for your technical solutions involving ACS723LLCTR-05AB-T! Let me know if you need further assistance.