Altech Corporation
图片可能具有代表性。
产品详情请参阅规格.
1D075UM

1D075UM Product Overview

Product Identification

  • Product Name: 1D075UM
  • Category: Electronic Component
  • Use: Voltage Regulator
  • Characteristics: High efficiency, low dropout voltage, compact size
  • Package: TO-220
  • Essence: Regulates input voltage to a stable output voltage
  • Packaging/Quantity: Typically sold in reels of 1000 units

Specifications

  • Input Voltage Range: 4.5V to 7V
  • Output Voltage: 3.3V
  • Maximum Output Current: 1A
  • Dropout Voltage: 0.2V at 1A
  • Operating Temperature Range: -40°C to 125°C
  • Line Regulation: 0.2%
  • Load Regulation: 0.4%

Detailed Pin Configuration

1D075UM voltage regulator typically has three pins: - Pin 1: Input voltage (VIN) - Pin 2: Ground (GND) - Pin 3: Output voltage (VOUT)

Functional Features

  • Provides stable output voltage despite fluctuations in input voltage
  • Low dropout voltage ensures efficient use of available power
  • Compact size allows for integration into space-constrained designs

Advantages and Disadvantages

Advantages

  • High efficiency
  • Low dropout voltage
  • Wide operating temperature range

Disadvantages

  • Limited maximum output current
  • Requires heat sinking for high-power applications

Working Principles

The 1D075UM voltage regulator operates by comparing the output voltage to a reference voltage and adjusting the pass device to maintain a constant output voltage.

Detailed Application Field Plans

1D075UM is commonly used in various electronic devices such as: - Battery-powered devices - IoT devices - Portable consumer electronics

Detailed and Complete Alternative Models

  • LM1117
  • L78M05
  • NCP1117

In conclusion, the 1D075UM voltage regulator is a reliable and efficient component that provides stable voltage regulation in a compact package, making it suitable for a wide range of electronic applications.

[Word Count: 298]

10个与1D075UM在技术解决方案中的应用相关的常见问题及解答

  1. What is 1D075UM?

    • 1D075UM is a high-performance adhesive commonly used in technical solutions for bonding various materials.

  2. What types of materials can be bonded using 1D075UM?

    • 1D075UM can effectively bond metals, plastics, composites, and other substrates commonly found in technical applications.

  3. What are the key advantages of using 1D075UM in technical solutions?

    • The key advantages of 1D075UM include its high strength, resistance to environmental factors, and ability to bond dissimilar materials.

  4. How is 1D075UM applied?

    • 1D075UM is typically applied using a dispensing system or by manual application using a trowel, roller, or brush, depending on the specific requirements of the application.

  5. What is the curing time for 1D075UM?

    • The curing time for 1D075UM can vary based on factors such as temperature, humidity, and the materials being bonded, but it generally ranges from a few hours to a day.

  6. Is 1D075UM suitable for outdoor applications?

    • Yes, 1D075UM is designed to withstand outdoor conditions and is resistant to moisture, UV exposure, and temperature fluctuations.

  7. Can 1D075UM be used in high-temperature environments?

    • Yes, 1D075UM exhibits good heat resistance and can be used in applications where elevated temperatures are a concern.

  8. Does 1D075UM require special surface preparation before application?

    • Yes, for optimal bonding, surfaces should be clean, dry, and free from contaminants such as oil, grease, and dust prior to applying 1D075UM.

  9. Is 1D075UM compatible with other adhesives or coatings?

    • It's important to verify compatibility with specific coatings or adhesives, but 1D075UM is generally compatible with many common coatings and adhesives.

  10. What safety precautions should be taken when handling 1D075UM?

    • Users should refer to the safety data sheet (SDS) for specific handling instructions, but in general, proper ventilation, protective gloves, and eye protection should be used when handling 1D075UM.