Bourns Inc.
图片可能具有代表性。
产品详情请参阅规格.
BD243C-S
查看详情 数据表

BD243C-S

Product Overview

Category: Semiconductor
Use: Power transistor
Characteristics: High voltage, high current, NPN type
Package: TO-220AB
Essence: Amplification and switching of electronic signals
Packaging/Quantity: Bulk packaging, quantity varies

Specifications

  • Collector-Emitter Voltage: 100V
  • Collector Current: 6A
  • Total Power Dissipation: 65W
  • Transition Frequency: 3MHz
  • Operating Temperature: -65°C to 150°C

Detailed Pin Configuration

  1. Base (B)
  2. Emitter (E)
  3. Collector (C)

Functional Features

  • High voltage capability
  • Fast switching speed
  • Low collector-emitter saturation voltage

Advantages and Disadvantages

Advantages: - Suitable for audio amplifiers and power switches - Robust construction - Wide operating temperature range

Disadvantages: - Relatively high power dissipation - Limited frequency response

Working Principles

The BD243C-S operates as an NPN bipolar junction transistor, amplifying and switching electronic signals. When a small current flows into the base terminal, it controls a larger current flow between the collector and emitter terminals.

Detailed Application Field Plans

  1. Audio amplifiers
  2. Power supply circuits
  3. Motor control systems
  4. Switching regulators

Detailed and Complete Alternative Models

  1. BD244C-S
  2. TIP31C
  3. 2N3055
  4. MJ15003

Note: The above information is for reference purposes only. Always refer to the manufacturer's datasheet for accurate specifications.

Word count: 270

10个与BD243C-S在技术解决方案中的应用相关的常见问题及解答

  1. What is the BD243C-S transistor used for?

    • The BD243C-S transistor is commonly used for general purpose amplification and switching applications.

  2. What are the key specifications of the BD243C-S transistor?

    • The BD243C-S transistor typically has a collector current rating of 6A, a collector-emitter voltage rating of 100V, and a power dissipation of 65W.

  3. Can the BD243C-S be used in high-power applications?

    • Yes, the BD243C-S can be used in moderate to high-power applications due to its relatively high power dissipation rating.

  4. What are some typical circuit configurations where the BD243C-S is used?

    • The BD243C-S is commonly used in audio amplifiers, power supplies, motor control circuits, and other general purpose switching applications.

  5. Is the BD243C-S suitable for use in automotive electronics?

    • Yes, the BD243C-S is often used in automotive electronic systems due to its robustness and ability to handle higher currents.

  6. What are the thermal considerations when using the BD243C-S in a circuit?

    • Proper heat sinking and thermal management should be considered, especially in high-power applications, to ensure the BD243C-S operates within its temperature limits.

  7. Are there any common failure modes associated with the BD243C-S?

    • Common failure modes include thermal runaway due to inadequate heat dissipation and overvoltage stress leading to breakdown.

  8. Can the BD243C-S be used in low-voltage applications?

    • While the BD243C-S has a relatively high collector-emitter voltage rating, it can still be used in low-voltage applications with appropriate circuit design.

  9. What are some alternative transistors to the BD243C-S if it's not available?

    • Alternatives to the BD243C-S include the BD237, BD239, and BD245 transistors, which have similar characteristics and can be used as substitutes.

  10. Where can I find detailed application notes for using the BD243C-S in technical solutions?

    • Detailed application notes for the BD243C-S can be found in the manufacturer's datasheet, as well as in various electronics engineering resources and forums.