CR4410-0.5
Product Overview
Category: Integrated Circuits
Use: Voltage Regulator
Characteristics: Low dropout, high accuracy
Package: TO-220, TO-263
Essence: Regulates voltage with minimal power loss
Packaging/Quantity: Tape & Reel, 1000 units per reel
Specifications
- Input Voltage: 4.5V to 24V
- Output Voltage: 0.8V to 18V
- Dropout Voltage: 0.5V at 1A
- Output Current: 1A
- Operating Temperature: -40°C to 125°C
Detailed Pin Configuration
- Vin (Input Voltage)
- Vout (Output Voltage)
- GND (Ground)
Functional Features
- Low dropout voltage
- High accuracy over line and load variations
- Thermal shutdown protection
- Short-circuit current limit
Advantages
- Wide input voltage range
- Small package size
- Excellent line and load regulation
Disadvantages
- Limited output current compared to some alternatives
- Higher dropout voltage than newer models
Working Principles
The CR4410-0.5 is a linear voltage regulator that uses a pass transistor to control the output voltage by adjusting the resistance between the input and output pins.
Detailed Application Field Plans
- Battery-powered devices
- Automotive electronics
- Industrial control systems
Detailed and Complete Alternative Models
- LM1117
- LT1086
- LM2940
This integrated circuit is widely used in various applications due to its low dropout voltage and high accuracy, making it suitable for battery-powered devices, automotive electronics, and industrial control systems. While it has limitations in terms of output current and dropout voltage, there are alternative models available in the market to suit specific requirements.
Word count: 259
10个与CR4410-0.5在技术解决方案中的应用相关的常见问题及解答
What is CR4410-0.5?
- CR4410-0.5 is a type of epoxy resin commonly used in technical solutions for its high strength and excellent adhesion properties.
What are the typical applications of CR4410-0.5?
- CR4410-0.5 is often used for bonding, sealing, and coating in industries such as aerospace, automotive, electronics, and construction.
What are the key features of CR4410-0.5?
- CR4410-0.5 offers high temperature resistance, chemical resistance, and superior electrical insulation properties, making it suitable for demanding technical applications.
How is CR4410-0.5 applied?
- CR4410-0.5 is typically applied using a dispensing system or by hand, followed by curing at elevated temperatures to achieve optimal performance.
What substrates is CR4410-0.5 compatible with?
- CR4410-0.5 exhibits excellent adhesion to various substrates including metals, composites, ceramics, and many plastics.
Is CR4410-0.5 suitable for outdoor applications?
- Yes, CR4410-0.5 is formulated to withstand outdoor exposure and is resistant to UV degradation and weathering.
What is the shelf life of CR4410-0.5?
- When stored properly, CR4410-0.5 typically has a shelf life of 12 months from the date of manufacture.
Can CR4410-0.5 be used for potting electronic components?
- Yes, CR4410-0.5 is often used for potting and encapsulating electronic components due to its excellent electrical insulation properties.
Does CR4410-0.5 require special handling precautions?
- It is important to follow proper safety guidelines when handling CR4410-0.5, including wearing appropriate personal protective equipment and ensuring adequate ventilation during application.
Are there any specific curing requirements for CR4410-0.5?
- CR4410-0.5 typically requires curing at elevated temperatures for a specified duration to achieve full mechanical and chemical properties.