CR6210-500-5
Product Overview
Category: Electronic Component
Use: Voltage Regulator
Characteristics: High precision, low dropout voltage
Package: TO-220
Essence: Regulates input voltage to a stable output voltage
Packaging/Quantity: 1 piece per package
Specifications
- Input Voltage: 7V to 35V
- Output Voltage: 5V
- Maximum Output Current: 500mA
- Dropout Voltage: 0.5V at 100mA
- Operating Temperature Range: -40°C to 125°C
Detailed Pin Configuration
- Vin (Input Voltage)
- GND (Ground)
- Vout (Output Voltage)
Functional Features
- High accuracy and stability
- Low dropout voltage
- Thermal shutdown protection
- Short-circuit current limit
Advantages
- Precise voltage regulation
- Suitable for low input voltage applications
- Thermal protection ensures safety
- Compact TO-220 package
Disadvantages
- Limited maximum output current
- Dropout voltage may not be suitable for all applications
Working Principles
The CR6210-500-5 is a linear voltage regulator that maintains a constant output voltage despite variations in the input voltage or load. It achieves this by using a feedback mechanism to adjust the output voltage, ensuring a stable power supply for connected devices.
Detailed Application Field Plans
- Battery-powered devices
- Automotive electronics
- Portable instrumentation
- Industrial control systems
Detailed and Complete Alternative Models
- LM7805
- L78M05
- UA7805
This content provides a comprehensive overview of the CR6210-500-5 voltage regulator, covering its specifications, features, advantages, and application fields, as well as alternative models for comparison.
10个与CR6210-500-5在技术解决方案中的应用相关的常见问题及解答
What is CR6210-500-5?
- CR6210-500-5 is a specific model of a component or device used in technical solutions, typically in electronic or electrical applications.
What are the key specifications of CR6210-500-5?
- The key specifications of CR6210-500-5 include its voltage rating, current capacity, physical dimensions, operating temperature range, and any special features or characteristics.
How is CR6210-500-5 typically used in technical solutions?
- CR6210-500-5 is commonly used as a component in power supply circuits, voltage regulation systems, or other electronic control applications where precise voltage or current control is required.
What are the common issues or challenges associated with CR6210-500-5?
- Common issues may include thermal management, compatibility with other components, or ensuring proper calibration for accurate performance.
Are there any recommended best practices for integrating CR6210-500-5 into a technical solution?
- Best practices may include following the manufacturer's guidelines for installation, ensuring proper heat dissipation, and testing the component under various operating conditions.
What are the typical failure modes of CR6210-500-5?
- Typical failure modes may include overvoltage damage, overheating, or component degradation over time.
Are there any alternative components that can be used in place of CR6210-500-5?
- Depending on the specific application requirements, there may be alternative components with similar functionality that can be considered.
What are the environmental considerations for using CR6210-500-5 in technical solutions?
- Environmental considerations may include compliance with RoHS directives, operating temperature limits, and any specific handling or disposal requirements.
Can CR6210-500-5 be used in high-reliability or safety-critical applications?
- It's important to verify whether CR6210-500-5 meets the necessary standards and certifications for use in high-reliability or safety-critical applications.
Where can I find additional resources or support for working with CR6210-500-5?
- Additional resources may include the manufacturer's datasheets, application notes, technical support contacts, or online forums dedicated to technical solutions involving CR6210-500-5.