PI6ULS5V9617AUEX

Product Overview

• Category: Integrated Circuit
• Use: Voltage Level Translator
• Characteristics: High-speed, Low-power, Bidirectional
• Package: QFN (Quad Flat No-Lead)
• Essence: Translates voltage levels between different logic families
• Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

• Supply Voltage: 1.2V to 3.6V
• Logic Voltage Levels Supported: 1.2V, 1.8V, 2.5V, 3.3V
• Number of Channels: 6
• Data Rate: Up to 100 Mbps
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The PI6ULS5V9617AUEX has a total of 20 pins. The pin configuration is as follows:

1. VCCA - Supply voltage for side A
2. GND - Ground
3. A1 - Channel A input/output
4. B1 - Channel B input/output
5. A2 - Channel A input/output
6. B2 - Channel B input/output
7. A3 - Channel A input/output
8. B3 - Channel B input/output
9. A4 - Channel A input/output
10. B4 - Channel B input/output
11. A5 - Channel A input/output
12. B5 - Channel B input/output
13. A6 - Channel A input/output
14. B6 - Channel B input/output
15. OE - Output Enable
16. VCCB - Supply voltage for side B
17. GND - Ground
18. NC - No Connection
19. NC - No Connection
20. NC - No Connection

Functional Features

• Bidirectional voltage level translation between different logic families
• Supports multiple logic voltage levels (1.2V, 1.8V, 2.5V, 3.3V)
• High-speed data transmission up to 100 Mbps
• Low-power consumption for energy-efficient operation
• Output enable pin for easy control of the translator's operation

Advantages and Disadvantages

Advantages

• Wide range of supported logic voltage levels
• High-speed data transmission capability
• Low-power consumption for energy efficiency
• Compact QFN package for space-saving designs
• Easy control of operation with output enable pin

Disadvantages

• Limited number of channels (6)
• Not suitable for applications requiring higher data rates

Working Principles

The PI6ULS5V9617AUEX is a voltage level translator that enables communication between different logic families. It operates by converting input signals from one logic voltage level to another, allowing seamless data transfer between devices using incompatible voltage levels. The translator uses a combination of level-shifting circuitry and bi-directional buffers to ensure accurate and reliable signal translation.

Detailed Application Field Plans

The PI6ULS5V9617AUEX finds applications in various fields where voltage level translation is required. Some potential application areas include:

1. IoT Devices: Facilitating communication between low-power microcontrollers and sensors operating at different voltage levels.
2. Consumer Electronics: Enabling compatibility between devices with varying logic voltage requirements, such as smartphones, tablets, and gaming consoles.
3. Industrial Automation: Bridging the gap between different logic families used in industrial control systems, ensuring seamless data exchange.
4. Automotive Electronics: Supporting voltage level translation in automotive applications, such as infotainment systems and advanced driver-assistance systems (ADAS).

Detailed and Complete Alternative Models

1. TXB0106: 6-bit bidirectional voltage level translator with automatic direction sensing.
2. SN74LVC8T245: 8-bit dual-supply bus transceiver with configurable voltage translation and integrated pull-up resistors.
3. PCA9306: Dual bidirectional I2C-bus and SMBus voltage-level translator with an enable input.

These alternative models offer similar functionality to the PI6ULS5V9617AUEX and can be considered based on specific application requirements.

Word count: 550 words