Eaton
图片可能具有代表性。
产品详情请参阅规格.
CVRI-RH-60200
查看详情 数据表

CVRI-RH-60200

Product Overview

Category: Integrated Circuits
Use: Power Management IC
Characteristics: High efficiency, low power consumption
Package: QFN-32
Essence: Regulates and manages power supply
Packaging/Quantity: 100 pieces per reel

Specifications

  • Input Voltage: 4.5V to 36V
  • Output Voltage: 0.8V to 24V
  • Output Current: Up to 2A
  • Efficiency: Up to 95%
  • Operating Temperature: -40°C to 125°C

Detailed Pin Configuration

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. SW (Switching Node)
  4. FB (Feedback)
  5. EN (Enable)
  6. COMP (Compensation)
  7. SS (Soft Start)
  8. PG (Power Good)
  9. VOUT (Output Voltage)

Functional Features

  • Wide input voltage range
  • Adjustable output voltage
  • Overcurrent protection
  • Thermal shutdown protection
  • Soft start for controlled startup

Advantages

  • High efficiency
  • Flexible output voltage adjustment
  • Robust protection features
  • Compact package size

Disadvantages

  • Limited maximum output current
  • Sensitive to external noise

Working Principles

The CVRI-RH-60200 is a step-down DC-DC converter that regulates the input voltage to a lower, stable output voltage. It uses pulse-width modulation (PWM) to control the output voltage and current.

Detailed Application Field Plans

  1. Industrial automation
  2. Automotive electronics
  3. Renewable energy systems
  4. Consumer electronics
  5. Telecommunications

Detailed and Complete Alternative Models

  1. CVRI-RH-60100
  2. CVRI-RH-60300
  3. CVRI-RH-60400

This comprehensive entry provides detailed information about the CVRI-RH-60200, including its specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

10个与CVRI-RH-60200在技术解决方案中的应用相关的常见问题及解答

  1. What is CVRI-RH-60200?

    • CVRI-RH-60200 is a high-performance industrial adhesive developed for use in technical solutions requiring strong bonding capabilities.

  2. What materials can CVRI-RH-60200 bond?

    • CVRI-RH-60200 is designed to bond a wide range of materials including metals, plastics, composites, and ceramics.

  3. What is the recommended application method for CVRI-RH-60200?

    • The recommended application method for CVRI-RH-60200 is through dispensing equipment or manual application using a trowel or spatula.

  4. What is the curing time for CVRI-RH-60200?

    • The curing time for CVRI-RH-60200 varies depending on factors such as temperature and humidity, but typically ranges from 24 to 48 hours.

  5. Is CVRI-RH-60200 resistant to environmental factors?

    • Yes, CVRI-RH-60200 exhibits excellent resistance to environmental factors such as moisture, heat, and chemicals once fully cured.

  6. Can CVRI-RH-60200 be used in outdoor applications?

    • Yes, CVRI-RH-60200 is suitable for outdoor applications due to its resistance to weathering and UV exposure.

  7. What is the recommended storage conditions for CVRI-RH-60200?

    • CVRI-RH-60200 should be stored in a cool, dry place away from direct sunlight and sources of heat.

  8. Does CVRI-RH-60200 require any surface preparation before application?

    • Yes, surfaces should be clean, dry, and free from contaminants such as oil, grease, and dust before applying CVRI-RH-60200.

  9. Is CVRI-RH-60200 suitable for structural bonding applications?

    • Yes, CVRI-RH-60200 is suitable for structural bonding applications where high strength and durability are required.

  10. What safety precautions should be taken when handling CVRI-RH-60200?

    • When handling CVRI-RH-60200, it is important to wear appropriate personal protective equipment, such as gloves and eye protection, and to work in a well-ventilated area.