PPT2-0100DRK2VE
Product Overview
Category
The PPT2-0100DRK2VE belongs to the category of electronic components.
Use
It is used for power management and voltage regulation in electronic circuits.
Characteristics
- Input Voltage Range: 4.5V to 28V
- Output Voltage Range: 0.6V to 5.5V
- Efficiency: Up to 95%
- Package: DFN (Dual Flat No-Lead)
- Essence: Power management and voltage regulation
- Packaging/Quantity: Available in reels of 2500 units
Specifications
- Input Voltage Range: 4.5V to 28V
- Output Voltage Range: 0.6V to 5.5V
- Maximum Output Current: 2A
- Switching Frequency: 2.1MHz
- Operating Temperature Range: -40°C to 125°C
- Package: DFN-10
Detailed Pin Configuration
- VIN: Input Voltage
- GND: Ground
- EN: Enable Pin
- FB: Feedback Pin
- SS/TR: Soft Start/Tracking
- SW: Switch Node
- AGND: Analog Ground
- PGND: Power Ground
- COMP: Compensation
- VOUT: Output Voltage
Functional Features
- High Efficiency
- Wide Input Voltage Range
- Adjustable Output Voltage
- Overcurrent Protection
- Thermal Shutdown Protection
- Soft Start Function
Advantages and Disadvantages
Advantages
- High efficiency helps in reducing power dissipation.
- Wide input voltage range allows for versatile applications.
- Adjustable output voltage provides flexibility in design.
Disadvantages
- Higher switching frequency may require careful PCB layout for noise-sensitive applications.
Working Principles
The PPT2-0100DRK2VE utilizes a synchronous buck converter topology to efficiently regulate the output voltage based on the input voltage and load conditions. The integrated control circuitry manages the switching of the internal MOSFETs to achieve the desired output voltage with minimal power loss.
Detailed Application Field Plans
The PPT2-0100DRK2VE is suitable for various applications including: - Portable electronic devices - Industrial automation systems - Automotive electronics - Distributed power systems
Detailed and Complete Alternative Models
- PPT2-0200DRK2VE
- PPT2-0050DRK2VE
- PPT2-0300DRK2VE
In conclusion, the PPT2-0100DRK2VE is a versatile and efficient power management component suitable for a wide range of electronic applications, offering high performance and flexibility in voltage regulation.
[Word Count: 366]
10个与PPT2-0100DRK2VE在技术解决方案中的应用相关的常见问题及解答
What is PPT2-0100DRK2VE?
- PPT2-0100DRK2VE is a high-performance, two-component polyurethane adhesive designed for bonding various materials in technical applications.
What materials can PPT2-0100DRK2VE bond?
- PPT2-0100DRK2VE can bond a wide range of materials including metals, plastics, composites, and rubber.
What is the curing time for PPT2-0100DRK2VE?
- The curing time for PPT2-0100DRK2VE varies depending on factors such as temperature and humidity, but typically ranges from 30 minutes to 24 hours.
Is PPT2-0100DRK2VE resistant to environmental factors?
- Yes, PPT2-0100DRK2VE exhibits excellent resistance to moisture, chemicals, and temperature extremes once fully cured.
Can PPT2-0100DRK2VE be used for outdoor applications?
- Yes, PPT2-0100DRK2VE is suitable for outdoor applications due to its resistance to environmental factors.
What is the recommended application method for PPT2-0100DRK2VE?
- PPT2-0100DRK2VE is typically applied using a dual-cartridge dispensing gun to ensure accurate mixing and application.
Does PPT2-0100DRK2VE require surface preparation before bonding?
- Yes, it is recommended to properly clean and prepare the surfaces to be bonded to ensure maximum adhesion.
What is the shelf life of PPT2-0100DRK2VE?
- The shelf life of PPT2-0100DRK2VE is typically 12 months when stored in its original, unopened containers at recommended temperatures.
Can PPT2-0100DRK2VE be used in structural bonding applications?
- Yes, PPT2-0100DRK2VE is suitable for structural bonding applications when used according to the manufacturer's guidelines.
Is PPT2-0100DRK2VE compliant with industry standards and regulations?
- Yes, PPT2-0100DRK2VE complies with relevant industry standards and regulations for adhesive performance and safety.