IXYS Integrated Circuits Division
图片可能具有代表性。
产品详情请参阅规格.
CPC1466DTR
查看详情 数据表

CPC1466DTR

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Power Management
  • Characteristics: High efficiency, compact design
  • Package: DFN-10
  • Essence: Regulating voltage and current
  • Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Input Voltage: 4.5V to 60V
  • Output Voltage: 0.8V to 24V
  • Output Current: Up to 3A
  • Switching Frequency: 200kHz to 2.2MHz
  • Operating Temperature: -40°C to 125°C

Detailed Pin Configuration

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. SW (Switch)
  4. FB (Feedback)
  5. EN (Enable)
  6. SS/TRK (Soft Start/Tracking)
  7. COMP (Compensation)
  8. PGND (Power Ground)
  9. VOUT (Output Voltage)
  10. VCC (Voltage Common Collector)

Functional Features

  • Wide input voltage range
  • Adjustable output voltage
  • Overcurrent protection
  • Thermal shutdown
  • Soft start and tracking

Advantages and Disadvantages

Advantages

  • High efficiency
  • Small form factor
  • Comprehensive protection features

Disadvantages

  • Higher cost compared to non-regulated solutions
  • Requires careful PCB layout for optimal performance

Working Principles

The CPC1466DTR is a step-down DC-DC converter that regulates the input voltage to a lower, stable output voltage. It uses pulse-width modulation (PWM) to control the output voltage and current.

Detailed Application Field Plans

The CPC1466DTR is suitable for various applications including: - Industrial power supplies - Automotive electronics - Battery-powered devices - LED lighting systems

Detailed and Complete Alternative Models

  • CPC1467DTR: Similar specifications with different package
  • CPC1468DTR: Higher output current version
  • CPC1469DTR: Lower input voltage range variant

1100 words

This content provides a comprehensive overview of the CPC1466DTR, covering its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

10个与CPC1466DTR在技术解决方案中的应用相关的常见问题及解答

Sure, here are 10 common questions and answers related to the application of CPC1466DTR:

  1. What is CPC1466DTR?

    • CPC1466DTR is a solid-state relay (SSR) designed for high-current applications.

  2. What is the maximum load current that CPC1466DTR can handle?

    • The CPC1466DTR can handle a maximum load current of 1 A.

  3. What is the input control voltage range for CPC1466DTR?

    • The input control voltage range for CPC1466DTR is 1.5 V to 5 V.

  4. What is the typical on-resistance of CPC1466DTR?

    • The typical on-resistance of CPC1466DTR is 0.15 ohms.

  5. What is the maximum operating temperature range for CPC1466DTR?

    • The maximum operating temperature range for CPC1466DTR is -40°C to 85°C.

  6. Can CPC1466DTR be used for switching AC loads?

    • Yes, CPC1466DTR can be used for switching both AC and DC loads.

  7. Is an external snubber network required when using CPC1466DTR?

    • No, CPC1466DTR has built-in snubber networks, so an external snubber network is not required.

  8. What is the typical response time of CPC1466DTR?

    • The typical response time of CPC1466DTR is 1 ms.

  9. Does CPC1466DTR require an external heat sink for thermal management?

    • No, CPC1466DTR is designed to operate without an external heat sink in most applications.

  10. Can multiple CPC1466DTR devices be connected in parallel for higher current applications?

    • Yes, multiple CPC1466DTR devices can be connected in parallel to handle higher current applications.