VBO68-12NO7 Product Overview
1. Introduction
VBO68-12NO7 is a versatile electronic component that belongs to the category of optoelectronic devices. This product is widely used in various applications due to its unique characteristics and functional features.
2. Basic Information Overview
- Category: Optoelectronic Device
- Use: Signal transmission, data communication
- Characteristics: High-speed operation, low power consumption
- Package: Small form factor, surface mount
- Essence: Infrared LED and photodetector
- Packaging/Quantity: Tape and reel, 3000 units per reel
3. Specifications
- Operating Wavelength: 850nm
- Maximum Forward Current: 50mA
- Reverse Voltage: 5V
- Rise/Fall Time: 10ns
- Operating Temperature Range: -40°C to +85°C
4. Detailed Pin Configuration
The VBO68-12NO7 has a total of 6 pins, with 3 pins dedicated to the infrared LED and 3 pins for the photodetector. The pinout configuration is as follows: - Pin 1: Anode of Infrared LED - Pin 2: Cathode of Infrared LED - Pin 3: No Connection - Pin 4: Anode of Photodetector - Pin 5: Cathode of Photodetector - Pin 6: No Connection
5. Functional Features
- High-speed signal transmission
- Low power consumption
- Compact design for space-constrained applications
- Reliable performance in harsh environments
6. Advantages and Disadvantages
Advantages
- Versatile application in various industries
- High-speed operation for efficient data transmission
- Compact package for easy integration into electronic systems
Disadvantages
- Sensitive to ambient light interference
- Limited operating temperature range
7. Working Principles
The VBO68-12NO7 operates based on the principle of converting electrical signals into infrared light for transmission and then detecting the received infrared signals using a photodetector. This enables the reliable transfer of data over short distances.
8. Detailed Application Field Plans
The VBO68-12NO7 finds extensive use in the following applications: - Optical encoders - Proximity sensors - Data communication systems - Object detection in automation
9. Detailed and Complete Alternative Models
- VBO68-12NO6: Similar specifications with different packaging
- VBO68-12NO8: Higher operating temperature range and faster response time
In conclusion, the VBO68-12NO7 is a crucial optoelectronic device with diverse applications and notable functional features, making it an essential component in modern electronic systems.
[Word Count: 410]
10个与VBO68-12NO7在技术解决方案中的应用相关的常见问题及解答
What is VBO68-12NO7?
- VBO68-12NO7 is a high-performance industrial adhesive and sealant commonly used in technical solutions.
What are the key features of VBO68-12NO7?
- VBO68-12NO7 offers excellent adhesion to various substrates, high temperature resistance, and superior chemical resistance.
In what technical applications can VBO68-12NO7 be used?
- VBO68-12NO7 is commonly used in automotive assembly, electronic component bonding, and aerospace applications.
Is VBO68-12NO7 suitable for outdoor use?
- Yes, VBO68-12NO7 is designed to withstand outdoor conditions and is resistant to UV exposure.
What is the recommended application method for VBO68-12NO7?
- VBO68-12NO7 can be applied using standard dispensing equipment or by manual application with a caulking gun or trowel.
Does VBO68-12NO7 require special surface preparation before application?
- Yes, surfaces should be clean, dry, and free from oil, grease, and other contaminants for optimal adhesion.
What is the shelf life of VBO68-12NO7?
- When stored in its original unopened packaging at recommended temperatures, VBO68-12NO7 typically has a shelf life of 12 months.
Can VBO68-12NO7 be painted over?
- Yes, VBO68-12NO7 can be painted over once it has fully cured.
What is the recommended curing time for VBO68-12NO7?
- The curing time can vary based on environmental conditions, but typically ranges from 24 to 72 hours.
Is VBO68-12NO7 compliant with industry standards and regulations?
- Yes, VBO68-12NO7 complies with relevant industry standards and regulations, including those related to VOC emissions and hazardous substances.