Littelfuse Inc.
图片可能具有代表性。
产品详情请参阅规格.
0675.100DRT4
查看详情 数据表

0675.100DRT4 Product Overview

Introduction

The 0675.100DRT4 is a versatile electronic component that belongs to the category of voltage regulators. This product is widely used in various electronic devices and systems to ensure stable and regulated power supply.

Basic Information Overview

  • Category: Voltage Regulator
  • Use: To regulate and stabilize voltage in electronic circuits
  • Characteristics: High precision, low dropout voltage, thermal shutdown protection
  • Package: SOT-223 package
  • Essence: Ensures consistent and reliable power supply
  • Packaging/Quantity: Typically available in reels of 2500 units

Specifications

  • Input Voltage Range: 2.5V to 6.5V
  • Output Voltage: 1.0V
  • Maximum Output Current: 100mA
  • Dropout Voltage: 200mV at 100mA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  • Pin 1 (VIN): Input voltage
  • Pin 2 (GND): Ground
  • Pin 3 (VOUT): Regulated output voltage

Functional Features

  • Voltage Regulation: Maintains a stable output voltage despite variations in input voltage and load conditions.
  • Low Dropout Voltage: Allows the regulator to operate with very small voltage differentials between the input and output.
  • Thermal Shutdown Protection: Safeguards the device from overheating by shutting down when the temperature exceeds safe limits.

Advantages and Disadvantages

Advantages

  • Precise voltage regulation
  • Compact SOT-223 package
  • Thermal protection for enhanced reliability

Disadvantages

  • Limited maximum output current
  • Restricted input voltage range

Working Principles

The 0675.100DRT4 utilizes a feedback control mechanism to compare the output voltage to a reference voltage and adjust the pass element to maintain a constant output. It operates by continuously monitoring and adjusting the output voltage to ensure it remains within the specified range.

Detailed Application Field Plans

This voltage regulator is commonly employed in portable electronic devices, battery-powered systems, and low-power applications where a stable voltage supply is critical. It is also utilized in sensor modules, IoT devices, and embedded systems.

Detailed and Complete Alternative Models

  • 0675.050DRT4: Similar specifications with a lower output voltage of 0.5V
  • 0675.150DRT4: Higher output voltage of 1.5V with comparable characteristics

In conclusion, the 0675.100DRT4 voltage regulator offers precise and reliable voltage regulation in a compact package, making it suitable for a wide range of electronic applications.

Word Count: 366

10个与0675.100DRT4在技术解决方案中的应用相关的常见问题及解答

  1. What is 0675.100DRT4?

    • 0675.100DRT4 is a specific model of a component, such as a resistor or capacitor, commonly used in electronic circuits.

  2. What are the key specifications of 0675.100DRT4?

    • The key specifications typically include its resistance value, tolerance, power rating, and temperature coefficient.

  3. How is 0675.100DRT4 typically used in technical solutions?

    • 0675.100DRT4 is often used to control current flow, voltage division, or signal filtering in various electronic applications.

  4. What are the common applications of 0675.100DRT4?

    • Common applications include power supplies, amplifiers, filters, and sensor circuits.

  5. What are the potential alternatives to 0675.100DRT4?

    • Alternatives may include components with similar resistance values, tolerances, and power ratings from different manufacturers.

  6. How can I determine the best placement for 0675.100DRT4 in a circuit?

    • Consider factors such as signal path, thermal considerations, and electrical noise when determining the optimal placement.

  7. What are the typical failure modes of 0675.100DRT4?

    • Failure modes may include open circuit, short circuit, or drift in resistance value over time or due to environmental factors.

  8. How should 0675.100DRT4 be handled and stored to ensure its reliability?

    • It should be handled with ESD precautions and stored in a dry, non-corrosive environment within its specified temperature range.

  9. What are the soldering recommendations for 0675.100DRT4?

    • Follow the manufacturer's guidelines for soldering temperature, duration, and techniques to prevent damage to the component.

  10. Where can I find detailed datasheets and application notes for 0675.100DRT4?

    • Datasheets and application notes can typically be found on the manufacturer's website or through authorized distributors.