Macronix
图片可能具有代表性。
产品详情请参阅规格.
MX25V1635FM2I
查看详情 数据表

MX25V1635FM2I

Product Overview

  • Category: Flash Memory
  • Use: Non-volatile storage for electronic devices
  • Characteristics: High-speed, low-power consumption, small form factor
  • Package: SOP8 (Small Outline Package)
  • Essence: Provides reliable data storage for various electronic applications
  • Packaging/Quantity: Typically supplied in reels of 2500 pieces

Specifications

  • Memory Size: 16Mb
  • Interface: SPI (Serial Peripheral Interface)
  • Operating Voltage: 2.7V - 3.6V
  • Operating Temperature: -40°C to 85°C
  • Data Retention: Up to 20 years
  • Erase/Program Cycle Endurance: 100,000 cycles

Detailed Pin Configuration

  1. CS - Chip Select
  2. SO - Serial Data Output
  3. WP - Write Protect
  4. VSS - Ground
  5. SI - Serial Data Input
  6. SCK - Serial Clock
  7. HOLD - Hold Input
  8. VCC - Power Supply

Functional Features

  • Fast Read and Program Speed
  • Low Power Consumption
  • Flexible Erase and Program Capability
  • Hardware and Software Protection
  • Deep Power-down Mode for Ultra-low Standby Power

Advantages and Disadvantages

Advantages

  • High-speed data transfer
  • Low power consumption
  • Small form factor
  • Reliable data retention

Disadvantages

  • Limited erase/program cycle endurance
  • Vulnerable to electrical interference

Working Principles

The MX25V1635FM2I operates on the principle of electrically erasable programmable read-only memory (EEPROM). It utilizes a floating gate transistor structure to store data by trapping electrons.

Detailed Application Field Plans

The MX25V1635FM2I is widely used in various electronic devices such as: - Consumer electronics - Automotive systems - Industrial equipment - Networking devices - Medical devices

Detailed and Complete Alternative Models

  • AT25DF161 by Adesto Technologies
  • W25Q16JV by Winbond Electronics

In conclusion, the MX25V1635FM2I flash memory device offers high-speed, reliable data storage with low power consumption, making it suitable for a wide range of electronic applications.

[Word Count: 320]

10个与MX25V1635FM2I在技术解决方案中的应用相关的常见问题及解答

  1. What is the MX25V1635FM2I?

    • The MX25V1635FM2I is a 16Mb (2MB) serial NOR flash memory with a high-speed SPI interface, commonly used in embedded systems for storing program code and data.

  2. What are the key features of the MX25V1635FM2I?

    • The MX25V1635FM2I features a wide voltage range, low power consumption, high-speed clock frequency, and a deep power-down mode, making it suitable for various applications.

  3. How can I interface with the MX25V1635FM2I?

    • The MX25V1635FM2I uses a Serial Peripheral Interface (SPI) for communication, allowing for easy integration with microcontrollers and other digital devices.

  4. What are some typical applications of the MX25V1635FM2I?

    • Common applications include firmware storage in consumer electronics, industrial control systems, automotive electronics, and networking equipment.

  5. What is the operating voltage range of the MX25V1635FM2I?

    • The MX25V1635FM2I operates within a wide voltage range of 2.7V to 3.6V, making it compatible with various system designs.

  6. Does the MX25V1635FM2I support high-speed data transfer?

    • Yes, the MX25V1635FM2I supports high-speed clock frequencies up to 104MHz, enabling fast read and write operations.

  7. Can the MX25V1635FM2I withstand harsh environmental conditions?

    • The MX25V1635FM2I is designed to operate reliably across a wide temperature range and is resistant to environmental stressors, making it suitable for rugged applications.

  8. What is the typical power consumption of the MX25V1635FM2I?

    • The MX25V1635FM2I features low power consumption, particularly in standby and deep power-down modes, contributing to energy-efficient system designs.

  9. Is the MX25V1635FM2I compatible with industry-standard programming tools?

    • Yes, the MX25V1635FM2I is compatible with widely used programming tools and software, simplifying the development and production processes.

  10. Are there any specific design considerations when using the MX25V1635FM2I in technical solutions?

    • Designers should consider proper decoupling, signal integrity, and layout guidelines to ensure optimal performance and reliability when integrating the MX25V1635FM2I into their applications.