MAX6860UK16D3+T

Product Overview

Category

MAX6860UK16D3+T belongs to the category of integrated circuits (ICs).

Use

This IC is commonly used in electronic devices for voltage monitoring and power supply sequencing.

Characteristics

• Voltage monitoring: MAX6860UK16D3+T provides accurate monitoring of voltage levels.
• Power supply sequencing: It ensures proper sequencing of power supplies in electronic systems.
• Package: The IC comes in a small SOT23-5 package.
• Essence: MAX6860UK16D3+T is an essential component for reliable power management in various applications.
• Packaging/Quantity: It is typically sold in reels, with each reel containing a specific quantity of ICs.

Specifications

The specifications of MAX6860UK16D3+T include:

• Input Voltage Range: 1.6V to 5.5V
• Threshold Voltage Options: 1.575V, 1.8V, 2.5V, 3.0V, 3.3V, 4.38V, 4.63V, 4.75V, 4.88V, 5.0V
• Accuracy: ±1.5%
• Operating Temperature Range: -40°C to +125°C
• Quiescent Current: 7µA (typical)
• Output Type: Active-Low Open-Drain
• Power-On Reset Delay: 150ms (typical)

Detailed Pin Configuration

MAX6860UK16D3+T has a total of five pins arranged as follows:

```

---

| | --| |-- |____| ```

Pin Configuration: 1. GND: Ground connection. 2. VCC: Positive power supply input. 3. RESET: Active-low reset output. 4. MR: Manual reset input. 5. VTH: Voltage threshold selection input.

Functional Features

The functional features of MAX6860UK16D3+T include:

• Accurate voltage monitoring: It ensures reliable detection of voltage levels within the specified range.
• Power supply sequencing: The IC enables proper sequencing of multiple power supplies, preventing potential damage to electronic components.
• Low quiescent current: MAX6860UK16D3+T consumes minimal power during operation, making it suitable for battery-powered devices.
• Reset output: The active-low reset output provides a signal indicating when the voltage falls below the programmed threshold.

Advantages and Disadvantages

Advantages: - Accurate voltage monitoring - Power supply sequencing capability - Low quiescent current consumption - Small package size

Disadvantages: - Limited voltage threshold options - Requires external components for complete functionality

Working Principles

MAX6860UK16D3+T operates by comparing the input voltage with the selected threshold voltage. When the input voltage falls below the threshold, the active-low reset output is triggered, indicating a power failure or an out-of-range condition. This allows the system to take appropriate actions, such as shutting down or initiating a backup power source.

Detailed Application Field Plans

MAX6860UK16D3+T finds applications in various fields, including:

1. Consumer Electronics: Used in smartphones, tablets, and portable devices for voltage monitoring and power management.
2. Industrial Automation: Ensures reliable power supply sequencing in control systems and machinery.
3. Automotive Electronics: Monitors voltage levels in automotive systems, providing protection against undervoltage conditions.
4. Medical Devices: Enables accurate voltage monitoring in medical equipment, ensuring patient safety.
5. IoT Devices: Used in Internet of Things (IoT) devices for efficient power management and voltage monitoring.

Detailed and Complete Alternative Models

Some alternative models to MAX6860UK16D3+T include:

1. MAX6861UK16D3+T
2. MAX6862UK16D3+T
3. MAX6863UK16D3+T
4. MAX6864UK16D3+T
5. MAX6865UK16D3+T

These alternative models offer similar functionality and characteristics, providing options for different voltage threshold requirements.

Word count: 511 words