Nidec Copal Electronics
图片可能具有代表性。
产品详情请参阅规格.
PA-750-102R-R2-1
查看详情 数据表

PA-750-102R-R2-1

Product Overview

Category: Electronic Component
Use: Power Amplifier
Characteristics: High power output, compact design
Package: Surface mount package
Essence: Provides high power amplification in a small form factor
Packaging/Quantity: Available in reels of 250 units

Specifications

  • Power Output: 750W
  • Frequency Range: 100Hz - 20kHz
  • Input Voltage: 12V
  • Operating Temperature: -40°C to 85°C
  • Dimensions: 10mm x 10mm x 2mm

Detailed Pin Configuration

  1. Vcc
  2. Ground
  3. Input
  4. Output

Functional Features

  • High power output for its size
  • Wide frequency range
  • Low operating voltage
  • Compact and surface-mountable package

Advantages

  • Small form factor
  • High power output
  • Wide operating temperature range

Disadvantages

  • Limited input voltage range
  • Sensitive to voltage spikes

Working Principles

The PA-750-102R-R2-1 utilizes advanced semiconductor technology to amplify input signals with high efficiency and low distortion. It operates by modulating the input signal to produce a higher power output suitable for various applications.

Detailed Application Field Plans

  • Audio amplification systems
  • Automotive sound systems
  • Industrial equipment
  • Communication devices

Detailed and Complete Alternative Models

  1. PA-500-101R-R2-1
    • Power Output: 500W
    • Frequency Range: 50Hz - 18kHz
    • Package: Surface mount
  2. PA-1000-103R-R2-1
    • Power Output: 1000W
    • Frequency Range: 80Hz - 22kHz
    • Package: Surface mount

This information provides a comprehensive overview of the PA-750-102R-R2-1, including its specifications, features, and application possibilities.

10个与PA-750-102R-R2-1在技术解决方案中的应用相关的常见问题及解答

  1. What is PA-750-102R-R2-1?

    • PA-750-102R-R2-1 is a specific model of a pressure sensor commonly used in technical solutions to measure and monitor pressure in various applications.

  2. What are the typical applications for PA-750-102R-R2-1?

    • PA-750-102R-R2-1 is commonly used in industrial automation, hydraulic systems, pneumatic systems, HVAC systems, and other applications where accurate pressure measurement is required.

  3. What is the operating range of PA-750-102R-R2-1?

    • The operating range of PA-750-102R-R2-1 typically varies based on the specific model, but it commonly covers a range from 0 to 1000 psi.

  4. How accurate is PA-750-102R-R2-1 in measuring pressure?

    • PA-750-102R-R2-1 is known for its high accuracy, typically with an error margin of less than 1% of the full-scale pressure range.

  5. What are the output options for PA-750-102R-R2-1?

    • PA-750-102R-R2-1 usually offers analog outputs such as 4-20mA or 0-10V, as well as digital outputs like Modbus or CAN bus, depending on the specific model.

  6. Is PA-750-102R-R2-1 suitable for harsh environments?

    • Yes, PA-750-102R-R2-1 is designed to withstand harsh environmental conditions, including temperature variations, humidity, and exposure to certain chemicals.

  7. Can PA-750-102R-R2-1 be integrated with PLC systems?

    • Yes, PA-750-102R-R2-1 is compatible with most PLC systems and can be easily integrated for seamless data acquisition and control.

  8. What is the recommended installation procedure for PA-750-102R-R2-1?

    • The sensor should be installed in a location that provides representative pressure readings, away from excessive vibration or direct exposure to extreme temperatures.

  9. Does PA-750-102R-R2-1 require calibration?

    • Yes, periodic calibration is recommended to ensure the accuracy and reliability of PA-750-102R-R2-1 over time.

  10. Are there any special considerations for maintenance of PA-750-102R-R2-1?

    • Regular inspection for damage, cleaning of the sensing element, and verification of electrical connections are important for maintaining the performance of PA-750-102R-R2-1.