ON Semiconductor
图片可能具有代表性。
产品详情请参阅规格.
BDV64BG
查看详情 数据表

BDV64BG

Product Overview

Category: Semiconductor
Use: Amplifier
Characteristics: High voltage, high speed
Package: TO-220AB
Essence: Power transistor
Packaging/Quantity: Bulk packaging, quantity varies

Specifications

  • Collector-Emitter Voltage (VCEO): 450V
  • Collector Current (IC): 8A
  • DC Current Gain (hFE): 40 to 160
  • Transition Frequency (fT): 30MHz
  • Power Dissipation (Pd): 80W

Detailed Pin Configuration

  1. Base (B)
  2. Collector (C)
  3. Emitter (E)

Functional Features

  • High voltage capability
  • Fast switching speed
  • Low saturation voltage

Advantages and Disadvantages

Advantages: - Suitable for high power applications - Fast response time

Disadvantages: - Higher power dissipation - Limited frequency range

Working Principles

BDV64BG operates as a power amplifier by controlling the flow of current between the collector and emitter terminals based on the input signal at the base terminal.

Detailed Application Field Plans

BDV64BG is commonly used in audio amplifiers, power supplies, and electronic ballasts due to its high voltage and fast switching characteristics.

Detailed and Complete Alternative Models

  • BDV65BG
  • BDV66BG
  • BDV67BG

Note: The above alternative models have similar specifications and pin configurations.

This completes the English editing encyclopedia entry structure for BDV64BG.

10个与BDV64BG在技术解决方案中的应用相关的常见问题及解答

  1. What is BDV64BG?

    • BDV64BG is a high-voltage NPN transistor commonly used in electronic circuits for applications requiring high voltage and current capabilities.

  2. What are the typical applications of BDV64BG?

    • BDV64BG is often used in power supply circuits, electronic ballasts, and other technical solutions requiring high-voltage switching.

  3. What is the maximum voltage and current rating of BDV64BG?

    • The maximum collector-emitter voltage (VCEO) is 450V, and the maximum collector current (IC) is 12A.

  4. How do I properly bias BDV64BG in a circuit?

    • BDV64BG should be biased according to the manufacturer's specifications, typically using appropriate base resistor values to ensure proper operation within the specified parameters.

  5. Can BDV64BG be used in audio amplifier circuits?

    • Yes, BDV64BG can be used in audio amplifier circuits, especially in designs where high voltage and current capabilities are required.

  6. What are the key thermal considerations when using BDV64BG in a technical solution?

    • Proper heat sinking and thermal management are crucial when using BDV64BG to ensure that it operates within its temperature limits and maintains reliability.

  7. Are there any common failure modes associated with BDV64BG?

    • Common failure modes include overvoltage stress, overcurrent conditions, and excessive heating, which can lead to breakdown or degradation of the transistor.

  8. Can BDV64BG be used in switch-mode power supply designs?

    • Yes, BDV64BG is suitable for use in switch-mode power supply designs due to its high-voltage and high-current capabilities.

  9. What are some alternative transistors to BDV64BG for similar applications?

    • Alternative transistors with similar characteristics include MJE13007, TIP3055, and MJ15003, among others.

  10. Where can I find detailed technical specifications and application notes for BDV64BG?

    • Detailed technical specifications and application notes for BDV64BG can be found in the datasheet provided by the manufacturer or on their official website.