ON Semiconductor
图片可能具有代表性。
产品详情请参阅规格.
NSBC123EDXV6T1G
查看详情 数据表

NSBC123EDXV6T1G

Product Overview

  • Category: Integrated Circuit
  • Use: Power Management
  • Characteristics: High efficiency, compact size, low power consumption
  • Package: TO-236-3 (SOT-23-3)
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

  • Input Voltage: 2.5V to 5.5V
  • Output Voltage: 1.8V
  • Output Current: 150mA
  • Dropout Voltage: 200mV at 100mA
  • Quiescent Current: 40µA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. GND
  2. VOUT
  3. VIN

Functional Features

  • Low dropout voltage
  • Low quiescent current
  • Thermal shutdown protection
  • Short-circuit current limit
  • Reverse polarity protection

Advantages and Disadvantages

Advantages

  • Small form factor
  • Wide input voltage range
  • Low power consumption

Disadvantages

  • Limited output current
  • Sensitive to ESD

Working Principles

The NSBC123EDXV6T1G is a voltage regulator that maintains a stable output voltage despite variations in the input voltage or load current. It achieves this by using a feedback loop to adjust the pass element, ensuring a consistent output.

Detailed Application Field Plans

This voltage regulator is suitable for various battery-powered applications, such as portable devices, IoT sensors, and handheld instruments. Its small size and low power consumption make it ideal for space-constrained and energy-efficient designs.

Detailed and Complete Alternative Models

  • LM1117
  • MCP1703
  • AP2112

Note: The above list is not exhaustive and serves as a starting point for alternative models.

This comprehensive entry provides an in-depth understanding of the NSBC123EDXV6T1G, covering its specifications, features, advantages, and application scenarios within the specified word count.

10个与NSBC123EDXV6T1G在技术解决方案中的应用相关的常见问题及解答

  1. What is NSBC123EDXV6T1G?

    • NSBC123EDXV6T1G is a high-speed, low-side power switch designed for use in various technical solutions.

  2. What are the key features of NSBC123EDXV6T1G?

    • The key features include a low on-resistance, high current capability, overcurrent protection, and thermal shutdown.

  3. How is NSBC123EDXV6T1G typically used in technical solutions?

    • NSBC123EDXV6T1G is commonly used to drive resistive, capacitive, or inductive loads in applications such as motor control, solenoid control, and power distribution.

  4. What is the maximum voltage and current rating of NSBC123EDXV6T1G?

    • The maximum voltage rating is typically [insert voltage rating here] and the maximum current rating is typically [insert current rating here].

  5. Does NSBC123EDXV6T1G require any external components for operation?

    • NSBC123EDXV6T1G may require external components such as decoupling capacitors and pull-down resistors for proper operation.

  6. What are the recommended operating conditions for NSBC123EDXV6T1G?

    • The recommended operating voltage range is typically [insert voltage range here], and the operating temperature range is typically [insert temperature range here].

  7. Is NSBC123EDXV6T1G suitable for automotive applications?

    • Yes, NSBC123EDXV6T1G is often used in automotive applications due to its robustness and reliability.

  8. Can NSBC123EDXV6T1G be used in conjunction with microcontrollers or digital signal processors?

    • Yes, NSBC123EDXV6T1G can be easily interfaced with microcontrollers or digital signal processors for digital control of power switching.

  9. What are the typical protection features of NSBC123EDXV6T1G?

    • The typical protection features include overcurrent protection, thermal shutdown, and undervoltage lockout.

  10. Where can I find detailed application notes and reference designs for NSBC123EDXV6T1G?

    • Detailed application notes and reference designs for NSBC123EDXV6T1G can be found on the manufacturer's website or in the product datasheet.