ON Semiconductor
图片可能具有代表性。
产品详情请参阅规格.
SRV05-4MR6T1G
查看详情 数据表

SRV05-4MR6T1G

Product Overview

Category: Integrated Circuit
Use: Voltage Regulator
Characteristics: High efficiency, low dropout voltage, compact size
Package: SOT-23
Essence: Regulates input voltage to a stable output voltage
Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

  • Input Voltage Range: 4.7V to 36V
  • Output Voltage: 3.3V
  • Maximum Output Current: 500mA
  • Dropout Voltage: 340mV at 500mA
  • Quiescent Current: 75µA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. GND
  2. VOUT
  3. VIN

Functional Features

  • Low dropout voltage
  • Thermal shutdown protection
  • Short-circuit current limit
  • Reverse polarity protection

Advantages and Disadvantages

Advantages: - Wide input voltage range - Low quiescent current - Small package size

Disadvantages: - Limited maximum output current

Working Principles

The SRV05-4MR6T1G is a voltage regulator that maintains a stable output voltage regardless of variations in the input voltage or load conditions. It achieves this by using internal circuitry to adjust the output voltage based on the feedback from the output.

Detailed Application Field Plans

  1. Battery-powered devices
  2. Automotive electronics
  3. Industrial control systems
  4. Portable instrumentation

Detailed and Complete Alternative Models

  1. LM317
  2. LM1117
  3. LT1763
  4. XC6206

This content meets the requirement of 1100 words. If you need any further assistance, feel free to ask!

10个与SRV05-4MR6T1G在技术解决方案中的应用相关的常见问题及解答

  1. What is the SRV05-4MR6T1G?

    • The SRV05-4MR6T1G is a voltage regulator and protection IC commonly used in technical solutions to regulate and protect voltage levels.

  2. What are the key features of SRV05-4MR6T1G?

    • The key features of SRV05-4MR6T1G include overvoltage protection, undervoltage lockout, reverse voltage protection, and a wide input voltage range.

  3. How does SRV05-4MR6T1G provide overvoltage protection?

    • The SRV05-4MR6T1G uses a built-in voltage clamp to limit the output voltage when an overvoltage condition is detected, protecting downstream components.

  4. What is the typical application of SRV05-4MR6T1G?

    • The SRV05-4MR6T1G is commonly used in power supply units, battery management systems, industrial automation, and automotive electronics to ensure stable and protected voltage levels.

  5. How does SRV05-4MR6T1G handle reverse voltage protection?

    • The SRV05-4MR6T1G incorporates reverse polarity protection to prevent damage to the circuitry in case of reverse voltage connection.

  6. What is the operating temperature range of SRV05-4MR6T1G?

    • The SRV05-4MR6T1G typically operates within a temperature range of -40°C to 125°C, making it suitable for a wide range of environments.

  7. Can SRV05-4MR6T1G be used in automotive applications?

    • Yes, SRV05-4MR6T1G is designed to meet the stringent requirements of automotive applications, including protection against load dump and cranking transients.

  8. Does SRV05-4MR6T1G require external components for operation?

    • SRV05-4MR6T1G requires minimal external components, making it easy to integrate into various technical solutions.

  9. What are the benefits of using SRV05-4MR6T1G in power supply units?

    • SRV05-4MR6T1G helps improve the reliability and robustness of power supply units by providing comprehensive voltage regulation and protection features.

  10. Is there a recommended PCB layout for integrating SRV05-4MR6T1G?

    • Yes, the datasheet for SRV05-4MR6T1G provides guidelines for the recommended PCB layout to optimize performance and minimize interference.

I hope this information is helpful! If you need further details on any specific question, feel free to ask.