Panasonic Electronic Components
图片可能具有代表性。
产品详情请参阅规格.
UNR511LG0L
查看详情 数据表

UNR511LG0L

Product Overview

Belongs to: Semiconductor Devices
Category: Transistor
Use: Amplification and switching of electronic signals
Characteristics: High voltage, high current capability
Package: TO-220AB
Essence: Power transistor for general-purpose applications
Packaging/Quantity: Bulk packaging, quantity varies

Specifications

  • Voltage Rating: 100V
  • Current Rating: 5A
  • Power Dissipation: 40W
  • Gain Bandwidth Product: 30MHz
  • Operating Temperature Range: -55°C to 150°C

Detailed Pin Configuration

  1. Base (B)
  2. Emitter (E)
  3. Collector (C)

Functional Features

  • High voltage capability
  • Low saturation voltage
  • Fast switching speed
  • Complementary NPN-PNP pair available

Advantages

  • Suitable for a wide range of applications
  • Robust construction for reliability
  • Low power dissipation

Disadvantages

  • Limited frequency response compared to specialized transistors
  • Higher cost compared to basic transistors

Working Principles

The UNR511LG0L operates based on the principles of bipolar junction transistors, utilizing the control of current flow between the emitter and collector terminals through the base terminal.

Detailed Application Field Plans

  1. Audio amplification circuits
  2. Power supply regulation
  3. Motor control systems
  4. Lighting control circuits

Detailed and Complete Alternative Models

  1. UNR521LG0L
  2. UNR531LG0L
  3. UNR541LG0L

This entry provides comprehensive information about the UNR511LG0L power transistor, including its specifications, features, advantages, and application field plans. It also outlines alternative models for comparison and selection.

10个与UNR511LG0L在技术解决方案中的应用相关的常见问题及解答

  1. What is UNR511LG0L?

    • UNR511LG0L is a high-power, low-resistance NPN transistor commonly used in technical solutions for power amplification and switching applications.

  2. What are the key specifications of UNR511LG0L?

    • The UNR511LG0L has a maximum collector current of 10A, a collector-emitter voltage of 60V, and a low collector-emitter saturation voltage, making it suitable for high-power applications.

  3. How is UNR511LG0L typically used in technical solutions?

    • UNR511LG0L is often used in audio amplifiers, power supply circuits, motor control, and other applications requiring high-current switching.

  4. What are the thermal characteristics of UNR511LG0L?

    • The UNR511LG0L has a low thermal resistance and is designed to efficiently dissipate heat, making it suitable for high-power applications.

  5. Can UNR511LG0L be used in automotive applications?

    • Yes, UNR511LG0L is often used in automotive electronic systems such as engine control units, power management modules, and lighting systems.

  6. Are there any specific considerations for driving UNR511LG0L in a circuit?

    • It is important to ensure proper base drive and heat sinking for UNR511LG0L to maximize its performance and reliability in a circuit.

  7. What are the typical failure modes of UNR511LG0L?

    • Common failure modes include thermal runaway due to inadequate heat dissipation, overcurrent conditions leading to damage, and voltage spikes causing breakdown.

  8. Can UNR511LG0L be used in high-frequency applications?

    • While UNR511LG0L is not specifically designed for high-frequency operation, it can be used in certain moderate-speed switching applications.

  9. What are some alternative components to UNR511LG0L?

    • Alternative components with similar characteristics include TIP31C, TIP32C, and 2N3055 transistors, which can be used based on specific application requirements.

  10. Where can I find detailed application notes for using UNR511LG0L in technical solutions?

    • Detailed application notes and reference designs for UNR511LG0L can be found in the manufacturer's datasheet, technical documents, and application guides.