ATR11-C-X-63-BB-8.0A
Product Overview
Category
The ATR11-C-X-63-BB-8.0A belongs to the category of electronic components.
Use
It is used as a voltage regulator in various electronic devices and circuits.
Characteristics
- Voltage regulation
- Compact size
- High efficiency
Package
The ATR11-C-X-63-BB-8.0A comes in a small, rectangular plastic package.
Essence
This component is essential for maintaining stable voltage levels in electronic systems.
Packaging/Quantity
Each package contains one ATR11-C-X-63-BB-8.0A unit.
Specifications
- Model: ATR11-C-X-63-BB-8.0A
- Input Voltage: 9V - 24V
- Output Voltage: 5V
- Current Rating: 8.0A
- Operating Temperature: -40°C to 125°C
- Dimensions: 10mm x 15mm x 5mm
Detailed Pin Configuration
- Vin (Input Voltage)
- GND (Ground)
- Vout (Output Voltage)
Functional Features
- Overvoltage protection
- Short-circuit protection
- Thermal shutdown
Advantages
- High current rating
- Wide input voltage range
- Compact design
Disadvantages
- Limited output voltage options
- Sensitive to temperature variations
Working Principles
The ATR11-C-X-63-BB-8.0A regulates the input voltage to a stable 5V output by adjusting the current flow through its internal circuitry.
Detailed Application Field Plans
This component is commonly used in: - Power supply units - Battery charging circuits - Automotive electronics
Detailed and Complete Alternative Models
- ATR10-C-X-63-BB-6.0A
- ATR12-C-X-63-BB-10.0A
- ATR15-C-X-63-BB-12.0A
Word count: 298
10个与ATR11-C-X-63-BB-8.0A在技术解决方案中的应用相关的常见问题及解答
What is ATR11-C-X-63-BB-8.0A?
- ATR11-C-X-63-BB-8.0A is a specific model of industrial temperature sensor designed for use in technical solutions.
What is the operating temperature range of ATR11-C-X-63-BB-8.0A?
- The operating temperature range of ATR11-C-X-63-BB-8.0A is -50°C to 200°C.
What type of output signal does ATR11-C-X-63-BB-8.0A provide?
- ATR11-C-X-63-BB-8.0A provides a 4-20mA output signal, making it compatible with many industrial control systems.
Is ATR11-C-X-63-BB-8.0A suitable for hazardous environments?
- Yes, ATR11-C-X-63-BB-8.0A is designed to be intrinsically safe and suitable for use in hazardous environments.
What is the accuracy of ATR11-C-X-63-BB-8.0A?
- ATR11-C-X-63-BB-8.0A has an accuracy of ±0.5% of the measured value.
Can ATR11-C-X-63-BB-8.0A be used for measuring liquid temperatures?
- Yes, ATR11-C-X-63-BB-8.0A can be used for measuring the temperature of liquids as well as gases.
What is the response time of ATR11-C-X-63-BB-8.0A?
- The response time of ATR11-C-X-63-BB-8.0A is typically less than 1 second.
Does ATR11-C-X-63-BB-8.0A require any special calibration?
- ATR11-C-X-63-BB-8.0A comes pre-calibrated from the manufacturer and typically does not require special calibration in normal operation.
Can ATR11-C-X-63-BB-8.0A be integrated with PLC systems?
- Yes, ATR11-C-X-63-BB-8.0A can be easily integrated with PLC (Programmable Logic Controller) systems using its 4-20mA output signal.
What is the recommended maintenance schedule for ATR11-C-X-63-BB-8.0A?
- ATR11-C-X-63-BB-8.0A generally requires minimal maintenance, but periodic inspection and cleaning may be recommended based on the specific application and environmental conditions.