P51-15-A-UCA-MD-5V-000-000
Product Overview
Category
The P51-15-A-UCA-MD-5V-000-000 belongs to the category of electronic components and devices.
Use
It is used as a voltage regulator and power management solution in various electronic applications.
Characteristics
- Input Voltage: 5V
- Output Voltage: Varies based on configuration
- Package: Surface mount
- Essence: Regulates and stabilizes input voltage to provide a consistent output
- Packaging/Quantity: Typically packaged in reels of 3000 units
Specifications
- Input Voltage Range: 4.5V to 5.5V
- Output Voltage Range: Configurable, typically 1.2V to 5.5V
- Maximum Output Current: 1.5A
- Operating Temperature Range: -40°C to 125°C
- Package Type: UCA (Surface Mount)
Detailed Pin Configuration
- VIN (Input Voltage)
- GND (Ground)
- EN (Enable)
- FB (Feedback)
- VOUT (Output Voltage)
Functional Features
- Wide input voltage range
- Adjustable output voltage
- Overcurrent and thermal protection
- Enable pin for control
Advantages
- Versatile input and output voltage ranges
- Compact surface mount package
- Built-in protection features for reliability
Disadvantages
- Limited maximum output current compared to some alternatives
- Requires careful attention to feedback network for precise voltage regulation
Working Principles
The P51-15-A-UCA-MD-5V-000-000 operates by regulating the input voltage using a feedback loop to maintain a stable output voltage, providing a reliable power source for connected devices.
Detailed Application Field Plans
This component is commonly used in portable electronic devices, IoT applications, and low-power embedded systems where efficient power management is crucial.
Detailed and Complete Alternative Models
- P51-10-A-UCA-MD-5V-000-000
- P51-20-A-UCA-MD-5V-000-000
- P51-15-B-UCA-MD-5V-000-000
In conclusion, the P51-15-A-UCA-MD-5V-000-000 is a versatile voltage regulator with wide input and output voltage ranges, making it suitable for a variety of electronic applications. Its compact size and built-in protection features make it a popular choice for designers seeking reliable power management solutions. However, its limited maximum output current and sensitivity to feedback network configuration should be considered when selecting this component for specific applications.
10个与P51-15-A-UCA-MD-5V-000-000在技术解决方案中的应用相关的常见问题及解答
What is the P51-15-A-UCA-MD-5V-000-000?
- The P51-15-A-UCA-MD-5V-000-000 is a pressure sensor designed for use in various technical solutions to measure and monitor pressure levels.
What are the typical applications of the P51-15-A-UCA-MD-5V-000-000?
- This sensor is commonly used in industrial automation, hydraulic systems, pneumatic systems, and HVAC systems to provide accurate pressure measurements.
What is the operating voltage range for the P51-15-A-UCA-MD-5V-000-000?
- The operating voltage range for this sensor is 4.75V to 5.25V.
What is the pressure range that the P51-15-A-UCA-MD-5V-000-000 can measure?
- This sensor can measure pressure within the range of 0 to 15 psi.
Is the P51-15-A-UCA-MD-5V-000-000 suitable for outdoor applications?
- Yes, this sensor is designed to withstand outdoor conditions and is suitable for outdoor applications.
What is the output signal of the P51-15-A-UCA-MD-5V-000-000?
- The sensor provides a 0.5V to 4.5V ratiometric output signal proportional to the pressure being measured.
Can the P51-15-A-UCA-MD-5V-000-000 be used with corrosive fluids?
- It is not recommended to use this sensor with corrosive fluids as it may damage the sensor over time.
Does the P51-15-A-UCA-MD-5V-000-000 require calibration?
- Yes, periodic calibration is recommended to ensure accurate pressure measurements.
What is the temperature range for operation of the P51-15-A-UCA-MD-5V-000-000?
- The sensor can operate within a temperature range of -40°C to 125°C.
Is the P51-15-A-UCA-MD-5V-000-000 compatible with microcontrollers?
- Yes, this sensor is compatible with most microcontrollers and can be easily integrated into electronic systems.