STMicroelectronics
图片可能具有代表性。
产品详情请参阅规格.
2STN1360
查看详情 数据表

2STN1360

Product Overview

  • Belongs to: Semiconductor devices
  • Category: Power transistors
  • Use: Amplification and switching of electrical signals
  • Characteristics: High power handling, low resistance, fast switching speed
  • Package: TO-220, TO-247
  • Essence: NPN bipolar junction transistor
  • Packaging/Quantity: Typically sold in reels of 1000 units

Specifications

  • Maximum Collector-Emitter Voltage: 60V
  • Maximum Collector Current: 15A
  • Power Dissipation: 125W
  • Transition Frequency: 30MHz
  • Operating Temperature Range: -55°C to 150°C

Detailed Pin Configuration

  1. Base (B)
  2. Emitter (E)
  3. Collector (C)

Functional Features

  • High current gain
  • Low saturation voltage
  • Fast switching speed
  • Low noise

Advantages and Disadvantages

Advantages

  • High power handling capability
  • Fast response time
  • Low on-state resistance

Disadvantages

  • Susceptible to thermal runaway if not properly heat-sinked
  • Sensitivity to overvoltage conditions

Working Principles

The 2STN1360 operates based on the principles of bipolar junction transistors. When a small current flows into the base terminal, it controls a larger current flowing between the collector and emitter terminals. This allows for amplification and switching of electrical signals.

Detailed Application Field Plans

  • Audio amplifiers
  • Power supplies
  • Motor control circuits
  • Switching regulators

Detailed and Complete Alternative Models

  • 2N3055
  • MJL21193
  • TIP31C

Note: The above information is for reference purposes only. Always refer to the manufacturer's datasheet for accurate specifications and usage guidelines.

Word Count: 298

10个与2STN1360在技术解决方案中的应用相关的常见问题及解答

Sure, here are 10 common questions and answers related to the application of 2STN1360 in technical solutions:

  1. What is the 2STN1360 transistor used for?

    • The 2STN1360 is a high-voltage NPN transistor commonly used in power supply and switching applications.

  2. What are the key specifications of the 2STN1360 transistor?

    • The 2STN1360 has a maximum collector-emitter voltage of 400V, a maximum collector current of 3A, and a maximum power dissipation of 40W.

  3. How can the 2STN1360 be used in power supply designs?

    • The 2STN1360 can be used as a switch in power supply designs to control the flow of current and regulate voltage levels.

  4. What are the typical applications of the 2STN1360 in technical solutions?

    • Typical applications include flyback converters, offline switch-mode power supplies, and general-purpose switching circuits.

  5. What are the important considerations when using the 2STN1360 in high-voltage applications?

    • It's crucial to ensure proper heat sinking and thermal management to maintain safe operating temperatures, especially in high-voltage applications.

  6. Can the 2STN1360 be used in audio amplifier circuits?

    • While it's primarily designed for power supply and switching applications, the 2STN1360 can also be used in audio amplifier output stages due to its high voltage and current capabilities.

  7. What are the recommended operating conditions for the 2STN1360?

    • The transistor should be operated within its specified voltage, current, and temperature limits to ensure reliable performance and longevity.

  8. Are there any specific driver requirements for driving the 2STN1360 in switching applications?

    • When used in switching applications, it's important to drive the base of the transistor with an appropriate driver circuit to ensure fast and efficient switching.

  9. What are the typical failure modes of the 2STN1360 and how can they be mitigated?

    • Common failure modes include thermal runaway and overvoltage stress. Proper design considerations, such as adequate heatsinking and voltage clamping, can help mitigate these risks.

  10. Where can I find detailed application notes and reference designs for using the 2STN1360 in technical solutions?

    • Manufacturers' datasheets, application notes, and online resources provide valuable information and reference designs for incorporating the 2STN1360 into various technical solutions.