STMicroelectronics
图片可能具有代表性。
产品详情请参阅规格.
P0115DA 5AL3
查看详情 数据表

P0115DA 5AL3 Product Overview

Basic Information Overview

  • Category: Electronic Component
  • Use: Voltage Regulator
  • Characteristics: Low dropout, high accuracy, low quiescent current
  • Package: TO-252-3 (DPAK)
  • Essence: Regulates input voltage to a stable output voltage
  • Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 18V
  • Output Voltage: 1.5V
  • Output Current: 5A
  • Dropout Voltage: 0.5V at 5A
  • Quiescent Current: 75µA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • High efficiency over a wide input voltage range
  • Thermal shutdown and current limit protection
  • Fast transient response

Advantages

  • Low dropout voltage enables efficient regulation
  • High accuracy ensures stable output voltage
  • Low quiescent current for minimal power consumption

Disadvantages

  • Limited output current compared to higher-rated models
  • Sensitive to thermal management due to high power dissipation

Working Principles

The P0115DA 5AL3 operates by comparing the reference voltage with the feedback voltage to adjust the pass element's resistance, thereby regulating the output voltage.

Detailed Application Field Plans

  • Battery-powered devices
  • Automotive electronics
  • Industrial control systems
  • Telecommunication equipment

Detailed and Complete Alternative Models

  • P0115DA 3AL3: 3A output current
  • P0115DA 8AL3: 8A output current
  • P0115DA 5BL3: Different package (TO-263-3)

This comprehensive entry provides an in-depth understanding of the P0115DA 5AL3 voltage regulator, including its specifications, features, applications, and alternatives.

Word Count: 298

10个与P0115DA 5AL3在技术解决方案中的应用相关的常见问题及解答

  1. What is P0115DA 5AL3?

    • P0115DA 5AL3 is a specific type of sensor or component used in technical solutions, typically related to automotive or industrial applications.

  2. What does P0115DA 5AL3 measure?

    • P0115DA 5AL3 is a temperature sensor that measures the temperature of a specific component or environment within a system.

  3. How accurate is P0115DA 5AL3?

    • P0115DA 5AL3 is designed to provide accurate temperature measurements within a specified range, typically with a high degree of precision.

  4. What are the typical applications of P0115DA 5AL3?

    • P0115DA 5AL3 is commonly used in automotive engine management systems, HVAC systems, industrial equipment, and other technical solutions where temperature monitoring is critical.

  5. What is the operating range of P0115DA 5AL3?

    • The operating range of P0115DA 5AL3 varies depending on the specific model and application, but it is designed to operate within a specific temperature range.

  6. How is P0115DA 5AL3 installed and connected in a system?

    • P0115DA 5AL3 is typically installed using standard mounting methods and connected to the system using appropriate wiring and connectors.

  7. What are the potential failure modes of P0115DA 5AL3?

    • Common failure modes of P0115DA 5AL3 may include sensor drift, electrical connection issues, or physical damage due to environmental factors.

  8. Can P0115DA 5AL3 be calibrated or adjusted?

    • Some models of P0115DA 5AL3 may have calibration or adjustment capabilities to ensure accurate temperature measurements.

  9. Are there any special considerations for integrating P0115DA 5AL3 into a technical solution?

    • It's important to consider factors such as environmental conditions, electrical compatibility, and data interpretation when integrating P0115DA 5AL3 into a technical solution.

  10. Where can I find technical specifications and documentation for P0115DA 5AL3?

    • Technical specifications and documentation for P0115DA 5AL3 can typically be obtained from the manufacturer's website, distributor, or technical support team.