SN65LVPE502CPRGER
Basic Information Overview
- Category: Integrated Circuit (IC)
- Use: Signal Conditioning and Data Transmission
- Characteristics: Low-Voltage Differential Signaling (LVDS) Serializer/Deserializer (SerDes)
- Package: 64-pin VQFN (Very Thin Quad Flat No-Lead)
- Essence: Converts parallel data into serial data and vice versa, enabling high-speed data transmission over long distances.
- Packaging/Quantity: Tape and Reel, 2500 units per reel
Specifications
- Supply Voltage Range: 3.0V to 3.6V
- Operating Temperature Range: -40°C to +85°C
- Data Rate: Up to 400 Mbps
- Number of Channels: 2
- Input/Output Interface: LVDS
- Power Dissipation: 200mW (typical)
Detailed Pin Configuration
- GND
- VCC
- CLKIN
- CLKOUT
- RXIN0P
- RXIN0N
- RXIN1P
- RXIN1N
- RXIN2P
- RXIN2N
- RXIN3P
- RXIN3N
- RXIN4P
- RXIN4N
- RXIN5P
- RXIN5N
- RXIN6P
- RXIN6N
- RXIN7P
- RXIN7N
- RXIN8P
- RXIN8N
- RXIN9P
- RXIN9N
- RXIN10P
- RXIN10N
- RXIN11P
- RXIN11N
- RXIN12P
- RXIN12N
- RXIN13P
- RXIN13N
- RXIN14P
- RXIN14N
- RXIN15P
- RXIN15N
- RXIN16P
- RXIN16N
- RXIN17P
- RXIN17N
- RXIN18P
- RXIN18N
- RXIN19P
- RXIN19N
- RXIN20P
- RXIN20N
- RXIN21P
- RXIN21N
- RXIN22P
- RXIN22N
- RXIN23P
- RXIN23N
- RXIN24P
- RXIN24N
- RXIN25P
- RXIN25N
- RXIN26P
- RXIN26N
- RXIN27P
- RXIN27N
- RXIN28P
- RXIN28N
- RXIN29P
- RXIN29N
Functional Features
- LVDS Serializer: Converts parallel data into serial data for high-speed transmission.
- LVDS Deserializer: Converts serial data back into parallel data at the receiving end.
- Supports up to 30 channels of LVDS input data.
- Provides clock recovery and data alignment functionality.
- Built-in pre-emphasis and equalization circuits for signal conditioning.
- Low power consumption and high noise immunity.
Advantages
- High-speed data transmission capability.
- Low power consumption.
- Robust noise immunity due to LVDS technology.
- Compact package size for space-constrained applications.
- Wide operating temperature range for versatile usage.
Disadvantages
- Limited number of channels (2) compared to some other SerDes ICs.
- Requires LVDS-compatible interfaces for proper operation.
Working Principles
The SN65LVPE502CPRGER operates by converting parallel data into serial data using LVDS technology. At the transmitting end, it receives parallel data and converts it into a high-speed serial stream. This serialized data is then transmitted over a differential LVDS interface. At the receiving end, the IC receives the serial data and converts it back into parallel data, which can be further processed by the receiving device.
Detailed Application Field Plans
- High-speed data communication systems
- Industrial automation and control systems
- Automotive electronics
- Medical equipment
- Test and measurement instruments
Detailed and Complete Alternative Models
- SN65LVPE501CPRGER: Similar functionality but with a single channel instead of two.
- SN65LVPE503CPRGER: Similar functionality but with three channels instead of two.
- SN65LVPE504CPRGER: Similar functionality but with four channels instead of two.
- SN65LVPE505CPRGER: Similar functionality but with five channels instead of two.
(Note: There
10个与SN65LVPE502CPRGER在技术解决方案中的应用相关的常见问题及解答
Sure! Here are 10 common questions and answers related to the application of SN65LVPE502CPRGER:
Q: What is SN65LVPE502CPRGER? A: SN65LVPE502CPRGER is a high-speed differential line driver and receiver designed for applications requiring ultra-low power consumption and high data rates.
Q: What is the maximum data rate supported by SN65LVPE502CPRGER? A: SN65LVPE502CPRGER supports data rates up to 2.5 Gbps, making it suitable for high-speed communication applications.
Q: What is the operating voltage range of SN65LVPE502CPRGER? A: SN65LVPE502CPRGER operates from a single 3.3V power supply, providing compatibility with standard logic levels.
Q: Can SN65LVPE502CPRGER be used in both transmitter and receiver applications? A: Yes, SN65LVPE502CPRGER can be used as both a line driver (transmitter) and a line receiver, making it versatile for various system designs.
Q: Does SN65LVPE502CPRGER support hot-plugging capability? A: Yes, SN65LVPE502CPRGER features hot-plug circuitry that allows for safe insertion and removal of the device while the system is powered.
Q: What is the typical power consumption of SN65LVPE502CPRGER? A: SN65LVPE502CPRGER has an ultra-low power consumption of typically 20 mW, making it suitable for power-sensitive applications.
Q: Is SN65LVPE502CPRGER compatible with different transmission media? A: Yes, SN65LVPE502CPRGER is compatible with various transmission media, including twisted-pair cables and printed circuit boards.
Q: Does SN65LVPE502CPRGER have built-in protection features? A: Yes, SN65LVPE502CPRGER includes built-in protection features such as overvoltage protection and thermal shutdown to ensure reliable operation.
Q: Can SN65LVPE502CPRGER be used in automotive applications? A: Yes, SN65LVPE502CPRGER is qualified for automotive applications and meets the AEC-Q100 standard, making it suitable for use in automotive electronics.
Q: What package options are available for SN65LVPE502CPRGER? A: SN65LVPE502CPRGER is available in a small-outline integrated circuit (SOIC) package, providing ease of integration into different system designs.
Please note that these answers are general and may vary depending on the specific requirements and application of SN65LVPE502CPRGER.