SN74LVC04AQPWREP

Product Overview

• Category: Integrated Circuit
• Use: Logic Gate
• Characteristics: Low Voltage, CMOS Technology
• Package: TSSOP (Thin Shrink Small Outline Package)
• Essence: Hex Inverter
• Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

• Supply Voltage Range: 1.65V to 5.5V
• Input Voltage Range: 0V to VCC
• Output Voltage Range: 0V to VCC
• Maximum Operating Frequency: 100MHz
• Propagation Delay: 3.8ns (typical)
• Input Capacitance: 2pF (typical)
• Output Current: ±24mA

Detailed Pin Configuration

The SN74LVC04AQPWREP has a total of 14 pins, numbered as follows:

1. GND (Ground)
2. A1 (Input A1)
3. Y1 (Output Y1)
4. A2 (Input A2)
5. Y2 (Output Y2)
6. A3 (Input A3)
7. Y3 (Output Y3)
8. VCC (Supply Voltage)
9. A4 (Input A4)
10. Y4 (Output Y4)
11. A5 (Input A5)
12. Y5 (Output Y5)
13. A6 (Input A6)
14. Y6 (Output Y6)

Functional Features

• Hex Inverter: The SN74LVC04AQPWREP consists of six independent inverters, each capable of converting a logic level input signal to its complement.
• Low Voltage Operation: It operates at a supply voltage range of 1.65V to 5.5V, making it suitable for low power applications.
• CMOS Technology: The use of Complementary Metal-Oxide-Semiconductor (CMOS) technology ensures low power consumption and high noise immunity.
• High-Speed Operation: With a maximum operating frequency of 100MHz, it can handle fast switching signals.
• Wide Input Voltage Range: It accepts input voltages from 0V to VCC, allowing compatibility with various logic families.

Advantages and Disadvantages

Advantages: - Low power consumption - High noise immunity - Wide supply voltage range - Fast switching speed

Disadvantages: - Limited output current capacity - Not suitable for high-voltage applications

Working Principles

The SN74LVC04AQPWREP operates based on the principles of CMOS technology. Each inverter consists of a PMOS transistor and an NMOS transistor connected in series between the supply voltage (VCC) and ground (GND). The input signal controls the state of these transistors, resulting in the output being the complement of the input.

Detailed Application Field Plans

The SN74LVC04AQPWREP is commonly used in various digital systems and electronic devices. Some application fields include:

1. Microcontrollers and Microprocessors: It is used for level shifting, signal inversion, and logic signal buffering in microcontroller and microprocessor-based systems.
2. Communication Systems: It finds application in communication systems for signal conditioning, data encoding/decoding, and clock synchronization.
3. Consumer Electronics: It is utilized in consumer electronics such as TVs, DVD players, and gaming consoles for signal processing and control functions.
4. Automotive Electronics: It is employed in automotive electronics for signal conversion, interface control, and sensor interfacing.
5. Industrial Automation: It is used in industrial automation systems for logic signal processing, motor control, and sensor interfacing.

Detailed and Complete Alternative Models

Some alternative models that can be considered as replacements for the SN74LVC04AQPWREP include:

1. 74HC04: This is a similar hex inverter IC with comparable specifications, but it operates at a higher supply voltage range (2V to 6V).
2. CD4069UB: This is another hex inverter IC that operates at a wider supply voltage range (3V to 18V) and has higher output current capacity.
3. NC7SZ04: This is a single inverter IC with lower power consumption and a smaller package size, suitable for space-constrained applications.

(Note: The above alternatives are provided for reference purposes. It is recommended to consult the datasheets and consider specific requirements before selecting an alternative model.)

Total words: 511