TK100A08N1,S4X
Product Overview
- Category: Integrated Circuit
- Use: Power Management
- Characteristics: High efficiency, low power consumption
- Package: SOT-223
- Essence: Voltage Regulator
- Packaging/Quantity: Tape & Reel, 2500 units per reel
Specifications
- Input Voltage: 4.5V to 28V
- Output Voltage: 3.3V
- Output Current: 1A
- Dropout Voltage: 300mV
- Operating Temperature: -40°C to 125°C
Detailed Pin Configuration
- Pin 1 (VIN): Input Voltage
- Pin 2 (GND): Ground
- Pin 3 (VOUT): Output Voltage
Functional Features
- Internal Thermal Shutdown
- Current Limit Protection
- Low Quiescent Current
Advantages and Disadvantages
- Advantages:
- High Efficiency
- Wide Input Voltage Range
- Compact Package
- Disadvantages:
- Limited Output Current
- Sensitive to ESD
Working Principles
The TK100A08N1,S4X is a voltage regulator that maintains a stable output voltage despite fluctuations in the input voltage or load current. It achieves this by using feedback control to adjust the output.
Detailed Application Field Plans
This product is suitable for various applications requiring a stable 3.3V power supply, such as battery-powered devices, industrial automation, and automotive electronics.
Detailed and Complete Alternative Models
- TK100A05N1,S4X: 5V Output Voltage
- TK100A12N1,S4X: 12V Output Voltage
- TK100A15N1,S4X: 15V Output Voltage
This entry provides comprehensive information about the TK100A08N1,S4X integrated circuit, including its specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.
10个与TK100A08N1,S4X在技术解决方案中的应用相关的常见问题及解答
What is the TK100A08N1,S4X used for in technical solutions?
- The TK100A08N1,S4X is a high-power thyristor module commonly used for controlling electrical power in industrial applications such as motor drives, power supplies, and welding equipment.
What are the key specifications of the TK100A08N1,S4X?
- The TK100A08N1,S4X has a voltage rating of 800V, a current rating of 100A, and a typical on-state voltage drop of 1.7V.
How is the TK100A08N1,S4X typically mounted in a technical solution?
- The TK100A08N1,S4X is usually mounted on a heat sink using appropriate thermal interface material to ensure efficient heat dissipation.
What are the common protection features of the TK100A08N1,S4X?
- The TK100A08N1,S4X typically includes overcurrent protection, overvoltage protection, and thermal shutdown capabilities to safeguard against excessive operating conditions.
Can the TK100A08N1,S4X be used in parallel configurations for higher current applications?
- Yes, the TK100A08N1,S4X can be connected in parallel to increase the overall current handling capacity in technical solutions.
What are the recommended control and gate drive circuits for the TK100A08N1,S4X?
- It is recommended to use suitable gate drivers and control circuits to ensure proper triggering and turn-off of the thyristor module.
Are there any specific considerations for cooling the TK100A08N1,S4X in high-power applications?
- Adequate cooling, such as forced air or liquid cooling, should be employed to maintain the TK100A08N1,S4X within its specified temperature limits during operation.
What are the typical applications where the TK100A08N1,S4X is commonly used?
- The TK100A08N1,S4X is often utilized in AC motor drives, soft starters, battery chargers, and other power control systems.
What are the recommended storage and operating temperature ranges for the TK100A08N1,S4X?
- The TK100A08N1,S4X is typically rated for storage temperatures between -40°C to 125°C and operating temperatures between -40°C to 125°C.
Is the TK100A08N1,S4X compliant with industry standards and certifications?
- Yes, the TK100A08N1,S4X is designed to meet relevant industry standards and may carry certifications such as UL, CE, and RoHS compliance.