OPL563-OCA Product Overview
Introduction
OPL563-OCA is a specialized integrated circuit belonging to the category of optical sensors. This component is designed for use in various electronic devices and systems, offering specific characteristics and features that cater to its intended applications.
Basic Information Overview
- Category: Optical sensor IC
- Use: Detection and measurement of light intensity
- Characteristics: High sensitivity, low power consumption, compact package
- Package: Small outline package (SOP), 8-pin configuration
- Essence: Light detection and conversion into electrical signals
- Packaging/Quantity: Typically supplied in reels of 2500 units
Specifications
- Operating Voltage: 2.7V to 5.5V
- Output Type: Digital
- Operating Temperature Range: -40°C to 85°C
- Response Time: 10ms typical
- Wavelength Range: 400nm to 1100nm
Detailed Pin Configuration
- VCC (Power supply)
- GND (Ground)
- OUT (Digital output)
- NC (Not connected)
- NC (Not connected)
- NC (Not connected)
- NC (Not connected)
- NC (Not connected)
Functional Features
- High Sensitivity: Capable of detecting a wide range of light intensities
- Low Power Consumption: Ideal for battery-powered devices
- Digital Output: Simplifies interfacing with microcontrollers and digital circuits
- Wide Wavelength Range: Suitable for diverse lighting conditions
Advantages and Disadvantages
Advantages
- Compact size enables integration into small form factor devices
- Low power consumption prolongs battery life in portable applications
- Digital output simplifies signal processing and interfacing
Disadvantages
- Limited to digital output only, may not be suitable for analog applications
- Sensitivity may be affected by ambient light conditions in certain environments
Working Principles
The OPL563-OCA operates based on the principle of photoelectric conversion. When exposed to light, the internal photodiode generates a corresponding electrical current, which is then processed to produce a digital output signal. The sensitivity and response time of the sensor enable accurate detection and measurement of light intensity.
Detailed Application Field Plans
The OPL563-OCA finds application in various fields, including: - Ambient light sensing in consumer electronics - Automatic brightness adjustment in displays - Light intensity monitoring in industrial automation - Proximity detection in smart devices
Detailed and Complete Alternative Models
- OPL562-OCA: Similar specifications with different pin configuration
- OPL564-OCA: Higher sensitivity variant for specialized applications
- OPL565-OCA: Lower power consumption variant for ultra-low-power devices
In conclusion, the OPL563-OCA offers a reliable solution for light detection and measurement in diverse electronic applications, catering to the demand for compact, low-power optical sensors with digital output capabilities.
[Word Count: 411]
10个与OPL563-OCA在技术解决方案中的应用相关的常见问题及解答
What is OPL563-OCA?
- OPL563-OCA is a type of optical adhesive used in technical solutions for bonding and sealing applications.
What are the key properties of OPL563-OCA?
- OPL563-OCA exhibits high optical clarity, excellent adhesion to various substrates, good chemical resistance, and low outgassing.
How is OPL563-OCA applied in technical solutions?
- OPL563-OCA is typically applied using a lamination process or by dispensing onto one of the substrates to be bonded.
What types of substrates can OPL563-OCA bond to?
- OPL563-OCA can bond to a wide range of substrates including glass, metal, plastics, and ceramics.
Is OPL563-OCA suitable for outdoor applications?
- Yes, OPL563-OCA is designed to withstand outdoor environmental conditions and has good UV stability.
What are the curing requirements for OPL563-OCA?
- OPL563-OCA can be cured using UV light or heat, depending on the specific product formulation.
Can OPL563-OCA be used for medical device applications?
- Some formulations of OPL563-OCA are suitable for medical device applications and comply with relevant regulatory standards.
Does OPL563-OCA have any limitations in terms of temperature resistance?
- OPL563-OCA can withstand a wide range of temperatures, but it's important to select the appropriate formulation for specific temperature requirements.
Are there any special handling considerations for OPL563-OCA?
- OPL563-OCA should be stored in a cool, dry place and protected from direct sunlight to maintain its performance.
What are some common industry applications for OPL563-OCA?
- OPL563-OCA is commonly used in display assembly, automotive electronics, medical devices, and consumer electronics for bonding and sealing purposes.