Vishay Siliconix
图片可能具有代表性。
产品详情请参阅规格.
IRFR9210TRPBF
查看详情 数据表

IRFR9210TRPBF

Product Overview

  • Category: Power MOSFET
  • Use: Switching applications in power supplies, converters, and motor control
  • Characteristics: High voltage, low on-resistance, fast switching speed
  • Package: DPAK (TO-252)
  • Essence: N-channel power MOSFET
  • Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Voltage Rating: 100V
  • Continuous Drain Current: 1.8A
  • RDS(ON): 0.4Ω
  • Gate Threshold Voltage: 2V to 4V
  • Total Gate Charge: 6.5nC
  • Operating Temperature Range: -55°C to 150°C

Detailed Pin Configuration

The IRFR9210TRPBF has three pins: 1. Gate (G) 2. Drain (D) 3. Source (S)

Functional Features

  • Fast switching speed for efficient power conversion
  • Low on-resistance minimizes power loss
  • High voltage rating for robust performance in various applications

Advantages and Disadvantages

Advantages

  • High voltage rating suitable for diverse applications
  • Low on-resistance for improved efficiency
  • Fast switching speed enhances performance

Disadvantages

  • Limited continuous drain current compared to some alternatives
  • Higher gate threshold voltage may require specific drive circuitry

Working Principles

The IRFR9210TRPBF operates as a switch in power electronics applications. When a sufficient voltage is applied to the gate terminal, it allows current to flow between the drain and source terminals, enabling efficient power control.

Detailed Application Field Plans

This MOSFET is commonly used in: - Power supplies - DC-DC converters - Motor control circuits - Battery management systems

Detailed and Complete Alternative Models

Some alternative models to consider are: - IRF4905PBF - FQP30N06L - STP55NF06L

Note: The above information is based on the latest available datasheet at the time of writing.

[Word Count: 306]

10个与IRFR9210TRPBF在技术解决方案中的应用相关的常见问题及解答

  1. What is the IRFR9210TRPBF?

    • The IRFR9210TRPBF is a power MOSFET transistor designed for use in various electronic applications, including power supplies, motor control, and lighting.

  2. What is the maximum drain-source voltage of the IRFR9210TRPBF?

    • The maximum drain-source voltage of the IRFR9210TRPBF is 100V.

  3. What is the maximum continuous drain current of the IRFR9210TRPBF?

    • The maximum continuous drain current of the IRFR9210TRPBF is 4.3A.

  4. What is the on-state resistance (RDS(on)) of the IRFR9210TRPBF?

    • The on-state resistance of the IRFR9210TRPBF is typically around 0.35 ohms.

  5. What are the typical applications of the IRFR9210TRPBF?

    • Typical applications of the IRFR9210TRPBF include switch mode power supplies, DC-DC converters, motor control, and LED lighting.

  6. What is the operating temperature range of the IRFR9210TRPBF?

    • The IRFR9210TRPBF can operate within a temperature range of -55°C to 150°C.

  7. Is the IRFR9210TRPBF suitable for high-frequency switching applications?

    • Yes, the IRFR9210TRPBF is suitable for high-frequency switching due to its fast switching characteristics.

  8. Does the IRFR9210TRPBF require a heat sink for certain applications?

    • Depending on the application and power dissipation, a heat sink may be required for the IRFR9210TRPBF to ensure proper thermal management.

  9. What are the key features of the IRFR9210TRPBF?

    • The key features of the IRFR9210TRPBF include low RDS(on), fast switching speed, low gate charge, and high ruggedness.

  10. Where can I find the detailed datasheet for the IRFR9210TRPBF?

    • The detailed datasheet for the IRFR9210TRPBF can be found on the manufacturer's website or through authorized distributors.