Vishay Siliconix
图片可能具有代表性。
产品详情请参阅规格.
SI1330EDL-T1-E3
查看详情 数据表

SI1330EDL-T1-E3

Product Overview

  • Category: Integrated Circuit
  • Use: Power Management
  • Characteristics: High efficiency, low power consumption
  • Package: DFN-8
  • Essence: Voltage Regulator
  • Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

  • Input Voltage Range: 2.5V to 5.5V
  • Output Voltage: 1.8V
  • Output Current: 3A
  • Switching Frequency: 2.4MHz
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. EN (Enable)
  4. FB (Feedback)
  5. SW (Switch Node)
  6. PGND (Power Ground)
  7. NC (No Connection)
  8. VOUT (Output Voltage)

Functional Features

  • High Efficiency: Provides efficient power conversion for various applications.
  • Low Power Consumption: Minimizes energy loss during operation.
  • Overcurrent Protection: Safeguards the circuit from excessive current flow.

Advantages and Disadvantages

Advantages

  • Compact Size: Suitable for space-constrained designs.
  • Wide Input Voltage Range: Versatile for different power sources.
  • High Switching Frequency: Enables the use of smaller external components.

Disadvantages

  • Limited Output Current: Not suitable for high-power applications.
  • Temperature Sensitivity: Performance may be affected at extreme temperatures.

Working Principles

The SI1330EDL-T1-E3 is a voltage regulator that takes an input voltage within a specified range and provides a stable output voltage. It achieves this through internal control circuitry and power switching components.

Detailed Application Field Plans

This voltage regulator is ideal for use in portable electronic devices, such as smartphones, tablets, and portable gaming consoles. Its compact size and efficient performance make it suitable for battery-powered applications.

Detailed and Complete Alternative Models

  • SI1331EDL-T1-E3: Similar specifications with adjustable output voltage.
  • SI1332EDL-T1-E3: Higher output current capability with similar input voltage range.

Note: The above information is based on the product's datasheet and may be subject to change.

Word Count: 324

10个与SI1330EDL-T1-E3在技术解决方案中的应用相关的常见问题及解答

  1. What is the SI1330EDL-T1-E3?

    • The SI1330EDL-T1-E3 is a high-speed, low-capacitance silicon PIN diode designed for use in RF and microwave applications.

  2. What are the key features of the SI1330EDL-T1-E3?

    • The key features include low capacitance, high switching speed, and low series resistance, making it suitable for high-frequency applications.

  3. What are the typical applications of the SI1330EDL-T1-E3?

    • Typical applications include RF switches, attenuators, phase shifters, and high-frequency signal routing in wireless communication systems and radar systems.

  4. What is the maximum frequency range for the SI1330EDL-T1-E3?

    • The SI1330EDL-T1-E3 is designed for use in applications up to 6 GHz, making it suitable for many modern wireless communication standards.

  5. What is the recommended operating voltage for the SI1330EDL-T1-E3?

    • The recommended operating voltage is typically around 3V, but it can vary based on specific application requirements.

  6. What are the thermal characteristics of the SI1330EDL-T1-E3?

    • The SI1330EDL-T1-E3 has good thermal performance, with a low thermal resistance and the ability to handle moderate power dissipation.

  7. Can the SI1330EDL-T1-E3 be used in automotive applications?

    • Yes, the SI1330EDL-T1-E3 is suitable for use in automotive radar and other high-frequency applications within automotive systems.

  8. Does the SI1330EDL-T1-E3 require any special handling during assembly?

    • It is recommended to follow standard ESD (electrostatic discharge) precautions during handling and assembly to prevent damage to the device.

  9. What are the packaging options available for the SI1330EDL-T1-E3?

    • The SI1330EDL-T1-E3 is available in various surface-mount packages, such as SOT-23 and SC-79, providing flexibility for different assembly processes.

  10. Are there any application notes or reference designs available for the SI1330EDL-T1-E3?

    • Yes, the manufacturer provides application notes and reference designs to assist engineers in implementing the SI1330EDL-T1-E3 in their technical solutions.