FM24CL64B-GTR
IC FRAM 64KBIT 1MHZ 8SOIC
型号
FM24CL64B-GTR
制造商/品牌
系列
F-RAM™
零件状态
Active
包装
Tape & Reel (TR)
技术
FRAM (Ferroelectric RAM)
工作温度
-40°C ~ 85°C (TA)
安装类型
Surface Mount
封装/箱体
8-SOIC (0.154", 3.90mm Width)
供应商器件封装
8-SOIC
电压 - 电源
2.7 V ~ 3.65 V
内存类型
Non-Volatile
内存大小
64Kb (8K x 8)
访问时间
550ns
时钟频率
1MHz
内存格式
FRAM
写入周期时间 - 字、页
-
内存接口
I²C
请求报价
请填写所有必填字段并点击“提交”，我们将在12小时内通过电子邮件与您联系。如果您有任何问题，请留言或发送电子邮件至 1943626632@qq.com，我们将尽快回复。
有货 8658 PCS
联系信息
more_pkgimg
more_schimg
more_3dimg
more_spec
About Cypress Semiconductor
Cypress Semiconductor is an American company that specializes in the design and manufacture of high-performance digital and analog integrated circuits (ICs).
The company was founded in 1982 and is headquartered in San Jose, California, USA.
Cypress offers a wide range of products including microcontrollers, memory products, wireless connectivity solutions, and other digital and analog ICs.
The company's products are used in various applications such as consumer electronics, automotive systems, industrial systems, and more.
Cypress is known for its expertise in mixed-signal and programmable system-on-a-chip (PSoC) technology, high-quality products, and innovation in the field of embedded systems.
*This information is for general informational purposes only, we will not be liable for any loss or damage caused by the above information.
Cypress Semiconductor is an American company that specializes in the design and manufacture of high-performance digital and analog integrated circuits (ICs).
The company was founded in 1982 and is headquartered in San Jose, California, USA.
Cypress offers a wide range of products including microcontrollers, memory products, wireless connectivity solutions, and other digital and analog ICs.
The company's products are used in various applications such as consumer electronics, automotive systems, industrial systems, and more.
Cypress is known for its expertise in mixed-signal and programmable system-on-a-chip (PSoC) technology, high-quality products, and innovation in the field of embedded systems.
*This information is for general informational purposes only, we will not be liable for any loss or damage caused by the above information.
more_desctext
CYPRESS - INFINEON TECHNOLOGIES - FM24CL64B-GTR - Ferroelectric RAM (FRAM), 64 Kbit (8K x 8) I2C, 1 MHz, 2.7 V to 3.65 V Supply, SOIC-8
Pin Count--------8
Part Category--------Integrated Circuit
Package Category--------Small Outline Packages
Footprint Name--------Small Outline Packages - 8-pin SOIC (150 Mils)-1
Pin Count--------8
Part Category--------Integrated Circuit
Package Category--------Small Outline Packages
Footprint Name--------Small Outline Packages - 8-pin SOIC (150 Mils)-1
download_pdf
more_faq
FM24CL64B-GTR Frequently Asked Questions (FAQs)
What is the maximum operating frequency of the FM24CL64B-GTR?
The maximum operating frequency of the FM24CL64B-GTR is 1 MHz.
Is the FM24CL64B-GTR compatible with 5V logic?
No, the FM24CL64B-GTR is a 3.3V device and is not compatible with 5V logic. It requires a 3.3V power supply and I/O voltage.
How do I handle the HOLD pin on the FM24CL64B-GTR?
The HOLD pin is an active-low input that allows the device to be put into a low-power standby mode. To use it, connect a pull-up resistor to VCC and a switch to ground. When the switch is closed, the device will enter standby mode.
What is the purpose of the WP pin on the FM24CL64B-GTR?
The WP pin is a write-protect pin that allows the device to be write-protected. When the WP pin is tied to VCC, the device is write-protected and cannot be written to. When the WP pin is tied to GND, the device can be written to normally.
How do I perform a software reset on the FM24CL64B-GTR?
To perform a software reset on the FM24CL64B-GTR, send a reset command (0x0F) to the device. This will reset the device to its default state.
What is the maximum operating frequency of the FM24CL64B-GTR?
The maximum operating frequency of the FM24CL64B-GTR is 1 MHz.
Is the FM24CL64B-GTR compatible with 5V logic?
No, the FM24CL64B-GTR is a 3.3V device and is not compatible with 5V logic. It requires a 3.3V power supply and I/O voltage.
How do I handle the HOLD pin on the FM24CL64B-GTR?
The HOLD pin is an active-low input that allows the device to be put into a low-power standby mode. To use it, connect a pull-up resistor to VCC and a switch to ground. When the switch is closed, the device will enter standby mode.
What is the purpose of the WP pin on the FM24CL64B-GTR?
The WP pin is a write-protect pin that allows the device to be write-protected. When the WP pin is tied to VCC, the device is write-protected and cannot be written to. When the WP pin is tied to GND, the device can be written to normally.
How do I perform a software reset on the FM24CL64B-GTR?
To perform a software reset on the FM24CL64B-GTR, send a reset command (0x0F) to the device. This will reset the device to its default state.
相关产品
关键词 FM24CL64B-GTR
FM24CL64B-GTR 电子元件
FM24CL64B-GTR 销售
FM24CL64B-GTR 供应商
FM24CL64B-GTR 分销商
FM24CL64B-GTR 数据表
FM24CL64B-GTR 图片
FM24CL64B-GTR 报价
FM24CL64B-GTR 提供
FM24CL64B-GTR 最低价格
FM24CL64B-GTR 搜索
FM24CL64B-GTR 购买
FM24CL64B-GTR 芯片
×
![]()